Sponsored

Search results

  1. DRAKE Modern Billet Hood Pin Kit for Mustang 2015-23 (FR3Z-6316892-LM)

    Hi all Had a change of plan so do not need this hood pin kit anymore. It is brand new, unfitted, only thing I did was take it out of the packaging. It comes with full colour instructions as well. This cost me about £135 but willing to sell for £90 inc. postage. Let me know if interested...
  2. Steeda Billet Throttle Body Spacer

    Hey all I have this for sale since fitting the Vortech kit. It has been on the car since Oct 2021. Won't have seen many miles, maybes 2k in that time. Any takers for £50 via PayPal (gift)? Thanks for looking.
  3. Sold: Steeda Strut Tower Brace

    Hey all I have my Steeda Strut Brace for sale. I've put the nuts, spacers and washers into seperate labelled jars so hopefully new owner can easily work out what goes where. But Steeda do have instructions as well if required. 🙂 I purchased it April last year. So it's seen about 12 months of...
  4. Maxflow Race Bypass Valve fluttering

    Hey. I had to do some data logging yesterday for Wengerd and I noticed when I let off the gas in 3rd gear at 5k rpm the car made fluttering sounds as it decelerated. No whoosh. I've read online that this is compressor surge causing the sound and could be that the the bypass valve needs...
  5. New Vortech Build - Car fires but wthen dies. Please help.

    Hi all I have a build thread here and I've just finished the install this afternoon. But I have a strange issue. The car turns over, fires, but then instantly dies. Video Now my battery is/was flat, but during this work and the writing of the tune I had another car next to me and I was...
  6. Sold: Steeda S550 ProFlow Mustang GT Open Cold Air Intake with SCT X4 Handset

    Hey 🙂 Since moving over to the Vortech on my 2018 GT, I have the Steeda ProFlow intake and SCT X4 Handset for sale. This kit is £1,175 new from Steeda UK. I've had it fitted for 12 months and in that time probably covered about 1,000 miles if that. I've returned my car to stock so the...
  7. Project Beefy (UK Vortech Build)

    My little project kicks off today so dedicating it to @beefcake and the team who helped me with picking a tuner kit and many many questions over the last few months and were so helpful in getting everything shipped safely to the UK, and of course a big thanks as well to @Wengerd Performance for...
  8. Getting myself worried. Vortech Fuel Rail Question.

    Hey I'm planning on following the provided guide this weekend to start my Vortech install. I've been re-reading the install manual and noticed when it talks about removing the fuel rail (pg.49), swapping injectors and refitting that it says: Locate the x4 OEM aluminium fuel rail spacers that...
  9. Tyre to road contact patch and pressures.

    Hi all Just looking at how my new tyres are running and I think, the rears may need some pressure removing, what do we think? Looking at where they are running the fronts at 32/33psi seem correct. The rears seem too high at the same pressure. I'm now running 305's on the rear so I'm guessing...
  10. Fender clip missing. Any ideas which part I need?

    Hey, just noticed it has gone bye bye somewhere. I'm confused with all the various clips and part numbers; I wondered if anyone could point me in the right direction please. :) Thanks.
  11. Steering pull. Tracking or something else?

    Hey I've had the car out a few times when the weather has allowed, and I've noticed the steering wheel has started to pull on its own (not violently) but enough to take notice when holding it in both hands. It makes driving a bit tiresome constantly having to make micro adjustments. I don't...
  12. Washer Jet Leaking

    Hello :) Does anyone know how the washer jet is removed please? I don't want to just pull at it in case I snap something. I think I have somehow sprung a leak! Is this a common thing to happen? I'm hoping the tube has just come off the end of the jet. There is no fluid reaching the...
  13. I don't understand wheel width (9J/9.5J/10J)

    Hey I'm sorry for being so dumb and asking this but I'm still on the hunt from some different 19" wheels for my car. My plan - I want to fit winter tyres to the current stock wheels. I then would like a new set of alloy wheels that would take a wider tyre up front and rear (not by much but...
  14. Spare set of alloys that don't cost the earth?

    Do they exist! 🤔 I'm eyeing up some nice winter tyres to use in the cold, ice, wet, slushy, conditions that have started to arrive (up North at least). The tread compound on these Potenza Sports can't handle the cold temps and are stiffening up. I finally settled on the Hankook icept evo 3's...
  15. Can you run 55 profile tyre?

    Hey all Just looking at all season tyre choices for standard UK fitment - 255/40/19 and 275/40/19. The choice is pretty dire. Having a fiddle around the sizing filters online, it would appear that a 55 profile in those sizes is the sweet spot. My GT isn't lowered and doesn't have any...
  16. Widest tyre on standard alloys?

    Hey I seem to recall that you can "plus 10" on tyre width in the back of my mind. At the moment I have 255/40/19R up front and 275/40/19R on the rear. Standard custom pack 3 forged 19" alloys. Would I be right in thinking the widest I can go is therefore 265/40 front and 285/40 on the rear...
  17. NGK 6510 Gap Confusion

    I know this has been covered a lot, I can see by the many search results I got back, but I'm so confused. 😆 I was trying to find out the gap for the NGK 6510 plugs to use with my Vortech supercharger which is coming next week (thank you @beefcake!!!). Some posts mention 0.30" - 0.35" (this...
  18. After a drain plug but I'm a bit confused.

    Hi all I'm coming up to another oil change on the '18 GT and I'd like to move away from the fragile yellow OEM plastic Ford plug. I did some reading on this forum about the Femco product(s). From what I gathered, the M12x1.75 brass drainers will do the trick. With the horizontal fitment into...
  19. Wonky Exhaust.

    Hey, Not sure if this is just me but does the left exhaust look out of whack with the other side? 🧐 Is this a normal thing with the active exhaust; perhaps just poor assembly? Or is this a fault and something I can potentially fix? I haven't had a good poke about yet, just noticed it when I...
  20. Quick one - Rear caliper piston orientation

    Hi all - I'm sure I read somewhere and now I can't seem to find it, but, when winding the rear piston in (clockwise) is there a correct orientation that the piston should be wound back to? I can't quite remember what I read now, but is it something to do with the groove / V has to be at the 12...


Top