Sponsored

Search results

  1. How to Enable Heated/Cooled Seats - All Models

    Please refer to the update in this post, I included the 2018+ models.
  2. How to Enable Heated/Cooled Seats - All Models

    You're right, that's what I do now, run them to the obd. I need to update the post
  3. How to Enable Heated/Cooled Seats - All Models

    You will need to route them to the h/c module, one of the hc module takes these data lines
  4. How to Enable Heated/Cooled Seats - All Models

    Pins 12 and 13 in the seat connector, see the pic in the original post
  5. Swapping Seats from Base to Premium - Driver Seat Move-ability Fix

    Unfortunately I don't. Best to find a base model vin and ask the dealership for the occupancy sensor p/n. Someone told me it is possible to fix this issue without needing to replace the sensor but didn't mention details. Might be able to find somewhere in this forum. Sorry for not being much...
  6. How to Enable Heated/Cooled Seats - All Models

    I would apply the 12v to the sliding motor directly. It is the one in bottom center. You can access it under the seat. Not very much space but doable. You will need to use wire props. Same principle for the window but will need to remove the door panel. You next (nerdy) option is to download the...
  7. How to Enable Heated/Cooled Seats - All Models

    Or you can simply splice the seat hot and feed to pin 9 (shortcut)
  8. How to Enable Heated/Cooled Seats - All Models

    Pin 9 passenger main connector goes to pin 4 connector c215 at the passenger kick panel. Before you do that, ensure there is a hot in that pin 4 coming from fuse 14 engine fuse box. See pics
  9. How to Enable Heated/Cooled Seats - All Models

    The pin is written next to the wire at the edges. 9 is under pin 1, the empty big hole... your seat connector probably has a wire on the other side
  10. How to Enable Heated/Cooled Seats - All Models

    You have pin 1 and 8 for the seat power, but you're missing pin 9 which is h/c module hot. You will need to add a hot to pin 9.
  11. How to Enable Heated/Cooled Seats - All Models

    can you put a pic of the seat connector? the bigger one? same view
  12. How to Enable Heated/Cooled Seats - All Models

    pic of the wires side, not the plastic side, need to see which wires/pins are there... and which are not...
  13. How to Enable Heated/Cooled Seats - All Models

    I saw your message but messed up the format and had to delete it then got sidetracked. Let's be civilized bro Again, seats with memory module needs a little bit of tweak to bypass memory. It is easy. Alternator is your call. I have seen this upgrade done on 10-15 stangs with no issue. If u want...
  14. How to Enable Heated/Cooled Seats - All Models

    If donor car has memory, then they will not move. You will need to bypass the memory module, which I explained in the main thread. See if that helps.
  15. SYNC 3 swap, It's all in here

    Are you 100% positive you connected both bezel connectors or just may you left one off?
  16. 2021+ Sync 3 Upgrade - Hazard Light Forscan Fix

    Has any of the 2021+ owners who upgraded from base to sync3 able to tell what was the forscan codes to fix the hazard light toggle switch? 726-29-02 is no longer listed in 2021+. There is only 726-29-01. Help!
  17. How to Enable Heated/Cooled Seats - All Models

    attached the harness pin out. Just to get you excited, if you can get the driver door module mscan +/- from the obd (gateway module) or from the door connector and give it power, the driver seat will start to slide back and forth when you start the car and shut it off. the pin out should give...
  18. How to Enable Heated/Cooled Seats - All Models

    Please send me a private message with you phone number so we can text. Much easier. Your best friend in this project will be the pin out for door harness... you will only need few wires from this harness added to your current door harness to make it work. Similar to heated/cooled seats, the door...
  19. How to Enable Heated/Cooled Seats - All Models

    Did you try the "driver seat fix", bypassing the memory module in your driver seat? there are pics and wiring diagram at the end of the first post explaining how to bypass the memory module. Power doesn't flow to memory seats directly to the switch, it goes through the module, so you need to...


Top