At initial inspection without pulling down the rear diffuser it looked okay and wasn’t visibly rubbing but after getting it back from the dealer after they changed the actuator it was clear it needed a closer look.
Warranty repair today.
They replaced the actuator once. Tested, had the error.
they put in another actuator.
I picked it up, drove it, it was fine for awhile and then got the error again.
pulled it apart tonight and found this.
3 of the 4 wires in the actuator...
I love the Corsa Sound having had Corsa systems on 2 previous vehicles but not yet on a Mustang.
My main concern would be sound output increase for the track mode, and will I be able to keep it under 103-105db limit we see on road course around here.
If the tone is...
Install of 15-17 Rear Seat Belt Receivers
Going to have the first track day at Laguna Seca this weekend and wanted to bring it out as close to stock as possible so I can observe the results of planned changes. However I still want a harness! I had grown used to a 6 point harness from my...
What do we anticipate from this exhaust?
I suspect nothing major in the way of gains on a stock car?
The tone is amazing as I genuinely love Corsas tuning.
Will this be significantly louder than the stock exhaust in track mode? Tracks here have 103-105db sound limits. Measured about 50ft off...
Good question, I believe that it would, but I couldn't say for certain.
QuickJack publishes the specs on their site for how much clearance you need between the tires.
The 7000 Is plenty big, and you can buy extensions for it, and have ALMOST the length of the EXT if you need something for a...
I second the side stripes with the GT500 in it.
I feel like the side stripes are a nod to the car's heritage.
I had all my stripes re-done (tried to cancel after seeing some in person, but it was too late for my VIN) and they now wrap all the way around the edges and we replaced the side...
Fast Mod Wednesday - 30 Second Install!
Followed @Jmeo example and ordered these belt pads off of Ebay. I had never felt the need to wear one as a belt had never bothered me as I am 6' 1" but I found the belts in the 500 a little bothersome.
Plus they look good!
Sorry on that one, though they had many available. I see them readily available online around $25 with shipping included, probably more cost effective than it could be if I picked one up. A little ADM I guess like the real thing. ha ha
Full vlog entry done on my wrap:
100% Custom PPF
Cquartz Finest Ceramic Coating
Ceramic Window Tint
And re-stripe with GT500 lettering and fully wrapped stripes.
Car came out great. We have been dealing with smoke out here for weeks so the lighting isn’t the best but it sparkles.
The reverse logic guide tools are very cool. I ordered a set, but let it be known, they will not work with Signature Wheels. The tolerances are very tight for the Signature Wheel and the holes don’t have the play built in to clear the lug guide.
I can't get under the car to check at the moment, but was wondering if anyone here has used a fire sleeve to go over the wires / connector at the exhaust end for the active exhaust wires?
If so what diameter did you use...