Sponsored

Search results

  1. What did you do to your Mach 1 today

    Can’t remember, but it was pretty early on. Remember this nut was never actually installed. Some lazy Ford builder guy had just put the bolt in upside down to hold the brace.
  2. What did you do to your Mach 1 today

    It’s the lower brace bolt for the oil cooler. You’re gonna need to get in under the belly pan or in from the wheel well liner. It was this bolt but on the passenger side cooler. It’s a long shot, but worth a try. Here’s another picture showing the brace:
  3. What did you do to your Mach 1 today

    Did you ever figure this noise out? I ask because I had a knock I felt on the front right when I hit a square edged bump which I solved. When I had the car up on the lift doing some other work I discovered that the brace to the right side oil cooler was missing the captive nut for the bolt. At...
  4. Track Setup for Mach 1 - What Wheel/Tire Combo can you recommend?

    I was using a trailer. But before the trailer I was just on one set of Apex wheels with the SC3r tires, and would arrive and drive with those wheels already fitted. Now I do have a buddy that fits a set of apex 19x11 in his car. @txgt will tell you all about that….
  5. Mach 1 Canards (Dive Planes)

    I don’t think these will fit the Mach 1 bumper shape.
  6. Mach 1 Canards (Dive Planes)

    Yep I didn’t trust the tape. Decided to use nuts and bolts.
  7. Mach 1 Canards (Dive Planes)

    They come with 3M tape which the guys at 777 say will support them, but I chose to drill and use Allen head bolts and nylock nuts.
  8. Texas Mach 1 handling pack springs and sway bars.

    Set of springs and sway bars from a 2021 Handling Pack Mach 1. Upgrade your non HP car. $75 pick up Allen, Texas 75002.
  9. Optimum Performance Customer Service

    Another vote for OP here. Always top notch customer service.
  10. Mach 1 air box lid and ram air - how to video

    It would be really cool if someone could make a molded piece to sit behind that cutout, to funnel the air straight into the filter box.
  11. Lightweight CF Drive Shaft options Tremec!

    Anyone running lightweight CF DS from the Drive shaft Shop or QA1 on their 6 speed Tremec? Anyone have real world experience before I hit the button. Tremec 6 speed Mach 1 users only. https://www.beefcakeracing.com/dss-fdsh60-c/
  12. Texas BMR Jacking Rails $80

    BMR Jacking Rails for S550. Only on the car for a couple of weeks. $80. Pickup Only, North Texas 75002.
  13. Mach 1 Canards (Dive Planes)

    Part of the overall aero build yes.
  14. Mach 1 Canards (Dive Planes)

    For anyone wondering, here they are:
  15. Mach 1 Canards (Dive Planes)

    Sent you a DM. These fit our bumper. Source: I have them.
  16. Mach 1 Canards (Dive Planes)

    Here’s pretty much the only Mach 1 specific fitting canard I’ve seen. Going to more draggy than the dual plane setup that AJ uses, but they do produce downforce. Similar style to some of the GT style canards on the FP racecar, but much bigger...
  17. Mach 1 Canards (Dive Planes)

    I don’t think these will fit the Mach 1 in the intended position due to our different bumper design. I talked to AJ a while back about these. Might be worth a shot though.
  18. HP Track Alignment specs.

    My advice would be to stay away from the dealer, and find yourself a reputable track prep shop who know what they are doing.
  19. What did you do to your S550 Mustang today?!

    Here you go: https://www.rubberfeetwarehouse.com/products/2-1-2-inside-diameter-rubber-grommet-1-16-groove-width-fits-2-3-4-hole?_pos=12&_sid=067983a5c&_ss=r


Top