Sponsored

Search results

  1. Anyone running a set of Weld Weldstars?

    Found a decent deal on these 17x10 forged Weld weldstar wheels (thanks eBay). Just came in today. Anyone else running a set of these?
  2. 20s in front 17s out back?

    I searched and didn’t find anything on this setup. Perhaps because it’s a stupid idea. I am looking to get some better traction out back while keeping good esthetics up front. I am considering a new set of Welds that are 17x10 out back and 20x9 up front. Running 305/45/17s and 285/35/20s...
  3. Anyone running 20” Weld Ventura S105s?

    Contemplating picking up a square set of 20”x10.5” +50 Weld Ventura S105s and having the spokes powder coated bronze. Ive searched with no luck of finding these wheels in a 20” on a mustang. Would love to see them before purchasing.
  4. Fuel System Randomly Primed

    So I am sitting in my garage, my car has been stationary for 24 hours, no entry no exit, and the fuel system just randomly primes as if I had opened the drivers door. I do have a fuel system installed in the car and have a battery tender on the car at all times when not driving. The battery...
  5. Knock between shifts

    Currently seeing 3-4* of positive knock on wot shifts (6speed, ESS G3, Verified E85). Single gear pulls are not seeing knock. I’ve gone over the car with a fine tooth comb looking for any potential culprits and can’t seem to locate anything obvious with the exception of my headers being about...
  6. Illinois UPR Dual Breather Catch Can

    Up for sale is a UPR Dual Vent catch can model 5029-221. I purchased this in March and I am only selling because where I had it mounted was causing false knock and I am out of room for other mounting locations due to my supercharger and how I mounted my fuel system components. I paid $260 plus...
  7. Fuel System Noises ?

    I’ve noticed since installing a return fuel system that on occasion I get a unique sound from the front of the car when the fuel system primes. Curious if others have heard something similar or have an idea of what’s causing it. All my lines look good, no leaks, pressures are good. Only makes...
  8. Gutting the PCV. Why?

    I am curious what benefit gutting the PCV has for these cars? I see some members recommend it when boosted and others don’t seem to think it matters. For my specific setup I am boosted and I have a UPR dual vent catch can which routes both sides of the motor to a single catch can that has a...
  9. Silly Catch Can Question.

    I am putting on a UPR dual inlet breather tank catch can on a boosted gen 3 and I see lots of conflicting information on gutting or changing the factory pcv check valve. I see UPR offers a “high flow pcv check valve” to replace the factory one which makes me question why you’d gut the factory...
  10. Wiring fuel level sensor?

    Hey everyone, I’m dropping in my new fuel pumps and stuck on what is happening with the fuel level sensor wiring. The kit was supposed to be plug and play but maybe I’m just stupid… do I need to cut and crimp these wires together as the connectors obviously don’t match up?
  11. PTFE hose assembly

    Curious what everyone uses/recommends for assembling PTFE hose ends for fuel systems? I am considering picking up this kit to support fabrication of my fuel lines but wanted to see what others may have had success with? https://www.jegs.com/i/KOUL-tools/581/681K/10002/-1
  12. Let’s talk about return style fuel systems

    I’m planning to go FI this spring and enjoy the extra HP and knock protection of E85. I’m currently E85 tuned, have access to consistent high quality E, and only drive the car rarely so low fueling issues or access to fuel is not a concern. With that being said, I plan to buy once and cry once...
  13. Illinois Steeda Front and Rear Adjustable End Links

    Up for sale are very very lightly used front and rear Steeda adjustable Endlinks. $190 OBO shipped.
  14. Sway bar install help needed.

    Installing my front Steeda sway bar and running into an issue. Sway bar is installed in the factory orientation, with the ends pointed up. The swaybar mounts have been torqued to 76 foot pounds of torque. The sway bar endlinks have been torqued to 85 foot pounds of torque. The swaybar has been...
  15. Guardian Designs Steering Wheel

    Shout out to @GuardianDesigns for coming through with my new steering wheel. Quality and fitment are top notch! Highly recommend for those in the market for a new wheel.
  16. Illinois Custom carbon fiber steering wheel

    Up for grabs is a custom carbon fiber steering wheel from my 2019 GT. This wheel was custom ordered through Vivid Racing for $1300. It has silver carbon fiber with red leather and sports a much larger wheel thickness than the factory one. The quality of the wheel is top notch. The wheel is...
  17. Steeda G-Trac extreme contacts header.

    First off yes I’ve engaged Steeda, they have been wonderful trying to help resolve the issue. What’s the issue? When installing the bracing the passenger side is making contact with the header which is subsequently making the front passenger mounting hole off-center by about 1/4” or so. This...
  18. Fuel Trim questions

    I am currently running a Lund flex fuel tune and it seems like every 3-4th fill up of E85 I have to do a KAM reset in order to get my LTFT to come back to earth. My STFT always seems to hover between -2 and 0. My LTFTs are usually around the same but every few fill ups the LT gets up to -9% or...
  19. Anyone running LTH brand LTHs?

    Confusing title yes. **Unboxing update on post 20*** **Install update on post 23** Curious if anyone out there is running a set of Long Tube Headers (that’s the company name) headers? I just ordered a set from beefcake and from what I saw here...
  20. Illinois WTB GT350, Beith, etc. steering wheel

    Looking for a GT350, Beith or similar aftermarket steering wheel for a 2019 Mustang GT.


Top