Separate names with a comma.
Had a few bits arrive yesterday and had an hour spare today so cracked on firing a few bits.
first up was a Velossa tech big mouth.
You can buy mine for 40k, makes it a bargain.
Bought this kit of eBay
the motors are the same...
I used this kit
The car in the vid is quoting flywheel so about 680whp. That’s very realistic. Again go read Geiger's own website.
My car spec is above. Can’t...
Not really no just bits that I have posted.
the spec is quite straightforward.
16 GT Manual
Edelbrock 2300 supercharger kit
Edelbrock cold air...
My car is tuned by Rob Shoemaker at Palm Beach Dyno and he knows his stuff.
I’m at 12psi (valves open, 14psi valves closed, gives you an idea of...
Don’t think it’s WHP. More likely flywheel figures so about 680 wheel.
I’m at 640whp and still on standard headers and exhaust. Some long tubes...
My 16 UK GT [ATTACH]
The supercharged cover is hitting the K brace.
Yes it came with single tip.
the car has the Roush valance fitted to accommodate the quad tips.
I have a 18+ active axle back on my 2016 GT.
just had to cut the old section off just near the resonator.
only issue is the valance, I fitted...
Saw a Bullitt yesterday going into Newmillerdam around 3/4 pm.
Just gone 3 years old and 50k miles.
Bucket of water over it. [ATTACH]
Bought and fitted the BMR cb762 kit to the rear subframe. Took about an hour to get done.
Haven’t had chance to drive the car yet though.
Mine is the 2300 kit not the 2650.
The 2300 only puts around 550whp on the Edelbrock 93 tune
Nothing. They first tuned it as it came from Edelbrock with only the addition of a BAP.
I then added GT350 TB, Edelbrock CAI and a 2,75 pulley....
Yes that is how the stock Edelbrock tune is. It really is terrible.
I went with PBD for my tune and it drives spot on.
2300 kit has a 3” pulley...
Be sure to email in to Edelbrock calibration for the updated tune also.