Search results

Unless something has changed, you need the MX not EX, but again correct me if I'm wrong. This is the updated version of the one I have: ODB Link MX+

Here are the pictures in case anyone wanted to use them for printouts. Figured I'd help out CJ here ;) Pics are 2570 x 1986

Track Mode: definitely not, this was searched, the setting is in ram Comfort Steering I believe is the same situation.

Been using them for 2 years now no Issues.

The car is not a US car but in Spain so this would not apply to him, but you are right, and mentioned the same above.

https://www.amazon.com/gp/product/B07BHD4QJ3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Thats where I got mine and probably cheaper for more.

Ok wait, after reading this post, you say that when the dial is in Auto (in the US, its Off, Parking light, Headlights, Auto) The parking/Amber is off, which is fine, but putting it in 3rd position (Headlight) its on, this is normal and cannot be changed by forscan as far as I know as this is...

Unfortunately no, being that I had a 2016 Cali Special and now a 2020 Shelby GT500 which both have the same front style, yours was the refresh front with the little lights as wannabe fog lights, but as far as I know it still would not be able to be switched by forscan, again, I could be wrong...

I'd offer 90K More than likely they will meet you in the middle between $97K and $90K which if they come to 93K I'd jump, I just ran across someone who bought a 2022 with 5K mi. on it and another that had 2021 10K mi. on it, they had no regrets. In the end its all about what you plan to do. I...

Anyone else can jump in if I am wrong, but 1 - No The fog lights cannot be programmed from ForScan to be signal lights, to do this you would have to re-wire the signal lights to the fog lights, nothing to do with forscan. 2 - Signal sending as far as I know cannot be done through forscan...

Thought I'd answer a few (Anyone correct me if I'm wrong please) and give you a suggestion. Suggestion: If you have the memory seats in the Bullitt like the Shelby Gt500, then do what I did based on someones suggestion (Sorry dont remember who to give credit to) Use Memory seat 3 and point your...

My apologies for the error, still you deserve better.

Response retracted.

April to Oct. But I have to cycle with my other cars so they dont get jealous :D

Yes I have, they have grouped Bulk Heads/ Button Head which is the rounded heads, and yes it can be clamped (Ask me how I know this :) ) I went in the direction of Socket Head so to keep the OEM look (The OEM screws for the wing were Socket Heads, and the rest were button heads) Thats why I used...

If you look at these pictures it will make more sense: https://www.mustang6g.com/forums/threads/cftp-spoiler-anti-theft-bolts.154003/post-3602509

I wanted to have the same screws like the oem, and not the bulk head screws. And the screws i used only come as 30mm and I had to file them down anyway as i did not want them sticking out over the nut to grab hold of.

Which 4 holes Jamie? Dog bone holes or the wing being held into the bracket?

I think you will want to check my pictures and understand where these go (Mis-typed in my last post meant screws, you'll understand why now): https://www.mustang6g.com/forums/threads/cftp-spoiler-anti-theft-bolts.154003/post-3602509 Also here is a picture of all the hardware you need (doing...

May I suggest you use these for the nuts as added measure. I suggested these Fasteners couple of years ago, they work great, and these washers add to the security: https://www.amazon.com/gp/product/B07SVD32ZW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1