Separate names with a comma.
I have never had that problem. Mine has been in the cupholder since 2017.
if you are looking to have all the nannies removed. There is a plug directly next to the air intake that you can pull to do so.
he is self-tuned.
Cant forgot the 6,694 1969 Mustang GTs that were produced!! lol
Just following the build!
I have my order in for a NON-CP Silver Black Roof at Invoice. No ADM.
I have been 9.80s with my Non Hybrid 3 Barton. Picking a shifter is personal preference. But has anyone been faster with an MGW?
The boost levels with the 10% will probably surpass the limit of running 93 octane. Unless you are planning on race fuel or E-85, it is not...
You do not have to pull the blower to install the injectors. But the fuel rail bolts in my opinion are the hardest part of the entire supercharger...
Edelbrock has been 8.69 and the Whipple has been 8.70. Both on stock 2018 rods pistons and heads.
Stage 1 runs great also !
I'm located near the Philadelphia airport. If you need any help just give me a ring at the shop, My direct line is 610-485-3597. We are also a...
That is Roush. The Edelbrock kits per year have what you need all ready.
I recommend a driveshaft with a CV on the differential end. DSS or QA1
They usually make 675ish on our mustang dyno with this setup.
3in pulley or 3.25?
Is your 19 already boosted?
The calibrated stage 1 kit comes with everything you need!
Theoretically It is a stock engine with upgraded timing components. Stock valves, Stock valve springs, stock head bolts, stock rods, pistons,...