Search results

  1. Quad tip upgrade

    Hi Guy's, Just a quick one if it helps, we have stock of the Roush Quad Tips for the Roush Axle Back's from this kit: https://www.roushperformance.com/parts/mustang-parts-category/mustang-exhaust-kits-category/2018-mustang-gt-axle-back-exhaust.html The base 2018+ GT's in the US have Factory...
  2. One Piece Drive Shaft

    Hi Dave, We have a build of Carbon Drive Shafts on the go with QA1 and going to come in around £1500 inc VAT. These are expected to be with us by the end of April. Although a little bit more expensive than DSS by a few hundred are said to be the best option on the market. Aluminium shafts...
  3. Roush Stage 2 Supercharger for 2017 GT - Anyone used the Roush Calibration in UK?

    No problem and glad I could be of help! 🍻
  4. Knobs in the UK

    Hi @Chumba, We can offer the following Shift Knobs. Unfortunately we are out of stock at the moment but shouldn't be too far away to be included on our next US orders. Regards Pricing on Ford Performance there is little to no margin on their products because there is no minimum advertised...
  5. Roush Stage 2 Supercharger for 2017 GT - Anyone used the Roush Calibration in UK?

    Hi @The_Fireball, You may or may not be aware NemesisUK.com are the UK's Offical Dealer for Roush Performance in the UK. We have been supplying these kits for the 2015-2017 since 2016 when Roush released their RHD kit and had developed International Calibration Files. So in answer to your...
  6. Oil cooler kit

    Hi @GR11M No problem and sorry if I confused things too. Our kit = £630 Inc VAT and Delivery. We currently have x1 kit avaiable in stock that we can dispatch Mon-Fri on a next working day service. We are just waiting on delivery more Setrab Oil Cooler Cores before more kits will become...
  7. Oil cooler kit

    I'm sorry I don't quite understand? The Oil Cooler Kit is just our complete kit with no Mishimoto parts supplied. We were talking about the Mishimoto Rad and Hoses and you would need to source a joiner if wanting to completely delete the Mishimoto diverter joint. We supply a 3m Hose with the...
  8. Side Mount Bucket Seats

    Okay that's cool it had been our plan all along we were hoping to get it all wrapped up earlier this year with a visit Autosport International but obviously not gone ahead this year. But like you have mentioned you need to sit in the seats as to what works for you and can ultimately come down to...
  9. Oil cooler kit

    Okay, That's all good then! We could possibly supply it without the Silicone U-Bend Connection removing this cost. But we are not able to supply individual components of the kit on their own.
  10. Side Mount Bucket Seats

    Hi @Sharpy200, No worries, We can certainly supply the complete Sparco range and in the process of being able to supply Recaro and Cobra seats too! So there will be a range of options. With regards to rear seat delete kits we will be looking to offer something like this that is clean to have...
  11. Oil cooler kit

    So, with the Mishimoto Radiator Hose Kit and the Larger lower hose. Is it just that it is not compatible because of the oil cooler hose lines not reaching the Factory RHD Oil Cooler Location? So, if the diverter is connected in place between the two lower hoses this will then connect from...
  12. Side Mount Bucket Seats

    This might help. He is a member on here: 2morrow Sparco also do Mustang Frame mounts we can source and supply. https://www.sparcousa.com/product/seat-base-600-series We are in the process of offering a track day enthusiast package for the Mustangs. So you will have Seats (Option Fixed or...
  13. Oil cooler kit

    Hi @GR11M , With our kit the Oil Filter stays in place where it is. Nemesis Kit deletes the rear oil to water cooler replacing it with a thermostatic take off plate (Where other kits supply a blanking flow though plate) This allows you to have the ports for the oil lines run off this to the...
  14. Oil cooler kit

    Ah okay that's fair enough and a good deal to hold onto if you are prepared to wait. I'm however not aware of any date when they are expected to come back into stock with Mishimoto UK. Sorry So would chase them up every other week or two.
  15. Oil cooler kit

    Hi Graham, Who was the Mishimoto kit ordered through? I believe Mishimoto Direct are out of stock themselves but might be able to get hold of one for you from another UK distributor that has stock. Were you planning on doing the install yourself or at which garage?
  16. Oil cooler kit

    Hi Deej, To be honest we don't really have any one in the Newcastle area. Motorsport and Performance in Batley Leeds is our Nearest Recommend Mustang Garage but still possibly an hour two away from you? Another garage we have recently been supplying parts to is...
  17. Oil cooler kit

    Hi Jon, Where abouts are you based? This is the Oil Cooler Kit we developed. We unfortunately don't have it as a direct fit kit as involved assembly is required currently. With the cutting of hose and attaching AN Fittings as well as mounting of the cooler core brackets themselves. So, recommend...
  18. BG synchro shift 2

    Hey Guy's we now have the BG Products Syncro Shift II in stock: https://nemesisuk.com/products/bg-products-universal-synchro-shift-ii-bg-8121e-x3-mustang-2011-20?_pos=2&_sid=ed214c45d&_ss=r We also have the Multi Gear Concentrate (MGC)...
  19. What did you do to your UK S550 Mustang Today

    We will look at getting a listing sorted. We are just waiting on the latest batch of take off plates to finish engraving. At the moment however, it is a recommended dealer supplied / fitted kit requiring professional installation with custom mounting and assembly of lines etc. Although this is...
  20. What did you do to your UK S550 Mustang Today

    We looked at every oil kit on the market for the Mustang and what was being made avaiable for the RHD market. With the design and manufacturing we have been working with a UK company that knows their stuff, as oil coolers are their specialty. All manufacturing / machining of the takeoff plates...
Top