Search results

  1. Ohio SVE SP2 19"x11" (set of four, square fitment)

    Four SVE SP2 19"x11" wheels I think most here are familiar with them - they're PP2 wheel replicas but quite a bit lighter Color : Glass Graphite ET: 50mm (all four wheels - front will require 25 mm spacer to fit and possibly some negative camber - this is square fitment that allows to rotate...
  2. Magride fault - speed limited to 80mph

    Anyone has an idea what could generate "Suspension Fault - Speed Limited to 80mph" message ? I made it go away but given situation I'm in, I'd rather not count on luck. Don't have OBD scanner with me either but probably could get one if needed.
  3. DSC Sport Magneride suspension controller review

    I've been considering getting a DSC Sport controller for Magneride for a quite while, I finally got the chance to use a borrowed one for a bit and now own one so though I'd write something for those that might be interested in it. For disclosure - I am not a suspension setup expert by any...
  4. Ohio 25mm bolt on spacers (pair) - $50 - new, never used

    Pair set of 25mm bolt on spacers - I bought it from LMR (https://lmr.com/item/LRS-5450AK/mustang-1-wheel-spacer-kit-black-15-18) and never ended up using it - Magneride cars studs are longer than non-MR so they were sticking out too far (I tried to trial fit one of them on the hub and wheel on...
  5. Ohio ZL1 Addons Wicker bill for 18-21 GT PP1 - new, never installed. $120

    ZL1 Addons wicker bill - exactly this model " https://zl1addons.com/products/mustang-18-19-performance-pack-1-wicker-bill Made to fit 18-21 PP1 spoler/wing. It's brand new and has never been installed - you can on the picture that protective film has not been removed, neither mounting hardware...
  6. Engine Masters - different octane comparison on engine dyno

    If someone has Motortend on Demand subscription, suggest watching most recent episode of Engine Masters. They've ran LS3 on engine dyno with 87, 91 pump gas, 110 and 113 race gas and E85 - adjusting timing and AFR for max power/torque. Results can obviously vary for different engines with...
  7. SPC Adjustable Camber Arms Review

    Thought I'd a quick review since I have installed these and went through an alignment with these. (for those that don't don't OEM rear alignment adjustment on these car really sucks - it's inboard mount bolt of the camber arm sliding horizontally in the slot in subframe - really inaccurate if...
  8. RLCA removal / re-install

    What is the right way to get to forward bolt on RLCAs ? I have knuckle out, can likely get the camber link out too, would rather not remove half shafts. Manual talks about removing exhaust but I don't see where the exhaust would be in the way of accessing that bolt...
  9. CAN bus mapping for Race Capture ?

    Anyone figured out CAN bus IDs for things like Brake Pressure and Steering Wheel Angle ? S197 presets don't seem to work (I'll experiment some more but at least first shot wasn't successful). Google search brings nothing, search on the forum is mostly someone asking question and others not...
  10. GT Axis Model 5 19" / staggered PP widths 9" front / 9.5" rear $200

    Axis Model 5 wheels in Gunmetal Gray color 5x114.3 bolt pattern They are matching size / offset for '15-20 Mustang GT PP1. Will fit any Mustang model (V6, GT / Ecoboost) except for GT350 / GT500. Will fit over PP brakes. Fronts are 9" width / ET 45mm, Rears are 9.5" width / ET 47mm (slightly...
  11. Ohio BMR Front Adjustable Sway Bar SB044R

    BMR Front Adjustable Sway Bar - P/N SB044R - $150, in person pick up only (45069) Comes as it does from BMR - with mount and polyurethane bushings. Has been on the car for 4 month (switched over to Ford Performance bar (part of Magnaride Handling Package). Bushings and the bar are in perfect...
  12. Sway bar rubbing against end link

    All - have an issue and need some ideas how to solve it - as you can see on the pic, end link (Steeda) is installed on the inside of the sway bar - for the reason of not fitting on the outside (not enough clearance vs. strut) - BMR endlink wouldn't fit eiher, stock one - maybe, but mine are...
  13. Steeda Differential bushing support - different pattern than bushing on a car

    Anyone had this problem ? My car had damper on the rear passenger side bolt - removed per Steeda's instruction but the bushing underneath has a different pattern than the bushing support.... What do I do - just installed it over it anyway ?
  14. Hub removal attempt - need some ideas...

    I am trying to remove hubs to replace the studs with the long ARP ones - hubs (since car has Magneride) are 4 bolts style (like GT350), not the ones held with large 36 mm nut. After undoing these 4 bolts it should technically come off - left one did (see pics), right one is stuck - most likely...
  15. Extended stud length for 25mm slip on spacer

    Will the 1 inch longer (3.435” total length) wheel studs be long enough for 25 or 27 mm slip on spacer ? I believe ARP P/N is 100-7733 ?
  16. DSC Sport now available for GTs

    I remember there was a thread about it but could not find (so mods - feel free to move this post). It looks like a DSC Sport now has a controller / calibration available for GT (previously it was GT350/GT350R only). It is something that might be in my future - I have a local dealer here that is...
  17. SVE wheels - incorrect offset marked

    Got a set of SVE SP2 wheels, 19"x11" - they're supposed to be ET50, one is marked ET 52.3 - no idea if that's what wheel actually measures - anyone ever seen anything like this ?
  18. American Muscle - misdelivered package

    A word of warning of how you're going to be treated if something goes wrong... Here's story : - Ordered sway bar from AM, they shipped it quick - On the of delivery their package and one more also coming through UPS shows delivered to front door at 3:04pm. I happen to be home and have outdoor...
  19. Anyone recognizes this part ?

    Came off my car during autocross today (or so I was told) - did a quick search at Tasca that yielded nothing.
  20. Can't remove back seat cushion

    I'll start with - I know where the buttons are - I removed the cushion in the past and the buttons seem to not work and be loose - no resistance when I push them. Does anyone have an idea how to unlatch the cushion ? Or have a pic of how the unlocking mechanism on the bottom side of the cushion...
Top