Search results

  1. PPF/Ceramic Coatings on Mach 1 Stripes...?

    Bumper, Hood-cut around strips, fenders, rear quarters=$2000. So so job.
  2. Mach 1 Cup2 Uneven Wear

    Fronts lasted about 5k till the inside was corded, was doing a lot of highway when I first got into the car. Camper plates were in for their entire life and the alignment was spot on. My 19 did the same thing and I normally got a year off the fronts. Still on cup2s on the rear and closing in on...
  3. Rattle/buzzing noise, perhaps center arm rest storage console behind the shifter?

    its near impossible to say what it is, its difficult as is to figure out originators in person. It could be anything from a bracket or a nut plate underneath everything, the exhaust harmonics, fit and finish or something just not bonded right. Ford states if its not audible over the HVAC...
  4. Gauges

    Axle, CHT, Trans GT 350 Gauge is there so I don't have to run CHT. It's called the ICM (INFORMATION CENTER MODULE) it reads off High speed can straight from the PCM, only PIDs for it are Turbo press ( for pressure and vacuum) EOT and oil press. As far as the Wiring Diagrams go CHT is really...
  5. Well we be Shakin!

    I don't need a shaker to see my hood shake at speed. This is one of those things I think looks cool at some angles but wrong at others. really like to see it in person before I judge it.
  6. Rear Seat Delete Take Rates

    Cheaper and not impossible to add a RSD then to add a rear seat and belts. I have both but ordered with a rear seat and took it out day 2 for the delete. Just reinstalled the rear seat as I might and have needed to pick up kids since the young lady as started her new job. 250 to remove 3k...
  7. 2022 Mach 1 (non performance) Recall Notice - Evaporative Emissions Canister Inspection / Replacement

    No information on the tech side of why other then incorrect part installed. Could make noise, Check engine light, Vacuum leak, smell of gas. It is a emission recall and some states require repairs prior to vehicle registration renewal. And if the dates state Oct 20th then its a good...
  8. 2022 Mach 1 (non performance) Recall Notice - Evaporative Emissions Canister Inspection / Replacement

    I understand why people say it, I'm in the industry and work next to guys that have to be reminded to breathe when they walk. It gives those that are in this business because they're enthusiast and enjoy the work a bad perspective. If anyone has a affected vehicle in the central Florida area...
  9. 2022 Mach 1 (non performance) Recall Notice - Evaporative Emissions Canister Inspection / Replacement

    comments like this really upset me. Its under the car attached to the spare tire well, for Mach 1 the diffuser would have to be dropped. Its easier then a oil change.
  10. 2022 Mach 1 (non performance) Recall Notice - Evaporative Emissions Canister Inspection / Replacement

    It's a evaporative emissions control, the charcoal canister holds fuel vapors till they can released into the engine and thoroughly burned at the appropriate time. Vapor would just vent out into the atmosphere on non emissions cars. It's also the part that fills up with fuel and gets damaged if...
  11. May be entering the fray again. M1 available for '23 MY ?

    TO is the only color I've yet to see. Its hard to say if FJG is really a subtle color or not, The Mach 1 as it is isn't regardless but I see FGJ as a more grown up fun color, its definitely distinctive on the car. I Live in Florida, so speed limits are more or less guidelines. I've over 100...
  12. May be entering the fray again. M1 available for '23 MY ?

    I Paid sticker for mine at 2.3%. Sells keeps offering me 10k more then I paid, its scary to think what they'll sell it for and this is at 10,000 miles. And mines gray with a Gov Plate, I waited that Fighter jet look, I've even looked in to doing Matte ppf. But I tend to agree with the too much...
  13. May be entering the fray again. M1 available for '23 MY ?

    From what I read a few weeks ago is that 23 kicks off a bit earlier and 24 will be much earlier, possibly even a mid year release and MY23 is just being filler till 24 is ready. No ford performance models for 23 and the Shelby name plates will be on hold for a few years. But don't be surprised...
  14. 2021 Mach 1 - 1200 miles - clunk when taking off (Sometimes......)

    I think so too, I miss read it as a PS rack mounting bolts which are a common culprit for a clunk. Those rear Diff bots have factory Locktite also...blue I believe, and are also a one time use but not nearly as aggressive. Without seeing what's going on I really can't upstand what would cause...
  15. 2021 Mach 1 - 1200 miles - clunk when taking off (Sometimes......)

    The bolts, if I'm thinking about the same ones, have a heavy amount of Red locktite from the factory, every bolt that attaches the rack is a one time use, They bind, pop, and are extremely stubborn to remove while the K member in installed. I think the bolts are torqued to just under 150 Lbs...
  16. 2021 Mach 1 - 1200 miles - clunk when taking off (Sometimes......)

    Those bolts are not fun, they use a serious amount of red Loctite on them and take alot of effort to take in or out. I always drop the K member when I'm dealing with the PS rack on Mustangs. We just had a new guy replacing one a week ago and we told him 100 times make sure its tight, use heat...
  17. My 1st Mach1 sighting in the wild

    Just Head on pasted a White Non HP just a block way from my house. First one I've seen in town and while driving mine.
  18. Michelin PS4S for Handling Pack available at Costco

    If I didn't install them myself, I would go to Costco's.
Top