Search results

  1. Looking for help on getting my 60’ down. E85 Hellion TT 6R80

    Hi guys and girls, I’m looking for advice on how to get my 60’ down. Fully built E85 Hellion TT with a 6R80 and C02 boost control. I am running a 305/45R17 ETSR drag radial. 16 psi cold. Full BMR and Kelltrac suspension. Settings is no-prep as our prepped track is essentially as good as a...
  2. Turbo Boost Strategies/Ramp on CO2

    Hi all, I am looking for some boost ramp strategies. Even some tips and tricks to give me a good staring point at the track. I recently installed a Boost Leash with CO2. Track is a poorly prepped 1/8 mile track. I’ve read about having all the boost ramped in before the 60’. Also to have it...
  3. 15” Drag Radials??

    Hi all, I’m installing my 15x9.33” wheels in a couple of weeks and looking for a 28x10.50 small tire drag radial that will perform well in mediocre track conditions. Car will be leaving on boost via the Boost Leash with C02 and 2-relay transbrake. Mustang is a fully built auto Hellion TT GT...
  4. Boost Leash Install Photos

    Hi All, Would anyone here have any photos of their Boost Leash install? This will be installed on a top mount Hellion kit with twin 6466’s. I’ll mount the controller with the Fat House Fab bracket below my radio. CO2 bottle will be mounted in my trunk. I also have the Motion Raceworks twin...
  5. Canada - Newfoundland WTB: Weld RTS S71 Beadlock 15x9.33’s

    Looking to buy a set of Weld RTS S71 Beadlock 15x9.33’s. If you know of a set available now or later on this year, I’ll kindly take them off your hands. Thank you. Shaun
  6. Handbrake cable rerouting for Baer Drag Brakes

    Hi All, Does anyone have a photo of their handbrake cables rerouted with the Baer rear drag brakes installed? Did you remove them all together? Looking for ideas as I just started installing my Baer SS4+ rear drag brakes. Thank you. Shaun
  7. Canada - Newfoundland FS: Baer SS4+ Deep Stage Drag Rotor Rings 11.65" x .705" $200

    Brand new Baer SS4+ Deep Stage Drag Rotor Rings 11.65" x .705” for sale for a 2015+ Mustang with the SS4+ drag brakes. This is the left and right rotor. Front or back. Slotted only. Purchased wrong replacement rotor rings from Baer. Asking $250 and I will discount shipping from Canada.
  8. Canada - Newfoundland Used Viking Crusader Rear Shocks (B358AM) $400

    Viking Crusader Double Adjustable Rear Shocks (B358AM) for sale. About 2000 kms use. No issues. Some light cosmetic scratches as seen in photos. Used in conjunction with BMR SM760 shock mounts. Hardware included as seen in photos. Purchased brand new from Viking in March 2020. Selling to...
  9. Canada - Newfoundland Brand New Carbon Fibre Key Fob Case 2018+

    Selling a brand new carbon fibre key fob case. Will not fit my 2015 Mustang. Purchased from a member here. Discounted shipping to US. Should be relatively cheap due to size of fob. Please look at attached photos to ensure this will fit properly. EDIT: No scratches or marks on fob...
  10. Expert advice for next season. Drag racing 1/8 mile.

    Hi all, My 1/8 drag racing season is now complete with the local track closed for the season. Time to start with the winter mods and research. I have a 2015 Hellion TT GT with 6466’s, built engine and trans running E85. Circle D 1B, Crusaders and every IRS part available. After grenading a...
  11. 2020 Mustang PP1 A10 Differential

    Hi again, I can get a loaded 2020 Mustang PP1 A10 differential from a friend. 3.55 gears. After reading up about it earlier, it looks like this is an iron housing. Would this be a direct swap with my 2015 Mustang GT A6? I am replacing the differential with a Wavetrac and will be adding...
  12. 2015+ Manual Iron Differential Part #‘s

    Hi all, I managed to grenade my 2015 Mustang GT / Hellion TT A6 different at the track yesterday on 10 psi and E85 leaving from idle. I have a Wavetrac on the way from Terry Beefcake, but I need the rest of the parts. Iron housing, 3.31 gears, install kit, auto pinion flange, etc. If anyone...
  13. Used Steeda 1/4” Billet Rear Spring Spacers - $40

    Used Steeda 1/4” Billet Spring Spacers. Couple hundred miles use. Cosmetic blemishes from install/removal. No issues. Went with 3/8” spacers instead for my setup. $40 plus discounted shipping as I am in Canada.
  14. Steeda Rear Spring Spacer. Need Input.

    Hi All, I am running BMR SP088R drag springs / Viking Crusaders in the back of the car with stock springs and struts up front. The car is currently raked slightly in the back even with a Steeda 3/8” spacer. I have a Steeda 1/2” spacer on the way for replacement to bring up the back of the car...
  15. Canada - Newfoundland Steeda Rear Spring Spacer. Need Input.

    Hi All, I am running BMR SP088R drag springs / Viking Crusaders in the back of the car with stock springs and struts up front. The car is currently raked slightly in the back even with a Steeda 3/8” spacer. I have a Steeda 1/2” spacer on the way for replacement to bring up the back of the...
  16. Canada - Newfoundland Used 2015 BMR Driveshaft Safety Loop DSL017. $60.

    Used 2015 BMR Driveshaft Safety Loop DSL017. Black hammer tone powder coat. No issues. Please see attached photos for normal wear. Comes with all hardware. Changed to red DSL017 to match rest of red BMR parts. $60. Discounted shipping to continental US. Will be available to ship until...
  17. Used Viking Warriors. $200

    Used Warriors. Used for about 10 k kilometres. Taken off 2015 GT/Hellion TT. Slight cosmetic blemishes in as seen in photos. No issues. No leaks. Need updated design to work with my BMR shock mounts. Cheaper for me to buy new and sell old shocks. $200 + discounted shipping to US...
  18. Anyone running a transmission cooler?? DD Hellion TT Auto.

    Hi all, Is anyone running a transmission cooler for their 6R80 with a Hellion top mount kit?? I daily this car in the summer and I think it would be a great idea to run one as I’m sure the transmission temps get good and hot. Transmission is a fully built 6R80. Best regards, Shaun
  19. Mickey Thompson Front Runners...26”, 27”, 28”??

    Hi all, I am looking to buy a set of Mickey Thompson Sportman SR front runners over the winter for a set of Weld S71 17x5 fronts. What tire size should I go with? 26”? 27”? 28”?? These are going on a 2015 GT Base. Hellion TT. Auto Any help is greatly appreciated. Thank you. Shaun
  20. A2W Intercooler Pump for Daily Driving

    Hi all, I am looking to upgrade my PNR A2W Intercooler Rule Bilge Pump with something that is suitable for daily driving. I know bilge pumps and this is not for continuous use. Shaun
Top