Search Results

  1. fmc_smt

    Texas ZL1 Lift Pads

    Shipped to 86326
  2. fmc_smt

    Added Extra's to dial in Camber after Lowering Spring Install

    OK p You might be surprised with you can get away with ...... the only concern I have is with the front splitter . I hardly ever bottom out , and usually it is the things in front of my rear tires .
  3. fmc_smt

    Added Extra's to dial in Camber after Lowering Spring Install

    If your going to change springs that is good time to update the upper strut plate on the fronts , you will want an adjustable one so you can adjust camber and camber . Also if you want to change the front struts this is the time to do it . Struts and shocks control coil oscillation, hence will...
  4. fmc_smt

    Added Extra's to dial in Camber after Lowering Spring Install

    Right now stock shocks , as for the rear there have been some upgrades . Viking shocks , basically a stedea stop the hop stuff , bmr shock mounts and vertical links . I'm boosted so was working on get the rear to hook .
  5. fmc_smt

    Frustrating to park it all winter

    You do realize that not all of Arizona gets that hot , I'm at 3250 ft and we might see a couple weeks at 110 , but at night it cools down to the 60s . More people die from exposure at night because of the temperature drop that happens once you get out of the concrete jungle.
  6. fmc_smt

    U0415 + P115E

    Also double check your wheel bearing .
  7. fmc_smt

    Frustrating to park it all winter

    Nevada tax brake is something to consider , but Las Vagas is only a 3.5 hour Cruz . 3.0 to Laughlin . Trust me I know what the drive times are .lol that is of course driving the posted limit . My other half is from Vegas , she still goes every four weeks to get her hair done . But as for living...
  8. fmc_smt

    Frustrating to park it all winter

    We do see snow , last a day , then gone . This morning I ran t the store at 7 , 25 deg on the temperature thing in the car , but by 12 we should be in the low 60s . I actually live in cottonwood, but the view from my house is all the red rocks of Sedona . And it is only a 20 min drive .
  9. fmc_smt

    Added Extra's to dial in Camber after Lowering Spring Install

    The only pain the ass is the left side , hard to get to the adjustment point due to the filler neck being in the way .
  10. fmc_smt

    What did you do to your S550 Mustang today?!

    Best way to clean them is drive it , unless you meant the hats .
  11. fmc_smt

    Frustrating to park it all winter

    Only advise look at central AZ . Snow in the north and hot as heck in the south . I'm right in the middle . I mean right in the middle of the state . Check out the Sedona /Verde Valley area .
  12. fmc_smt

    Added Extra's to dial in Camber after Lowering Spring Install

    I have a 2015 on eibach sportlines. 1.5 drop at all four corners . The fronts I installed maximum motor sports camber /caster plates . There is enough adjustment in the rear to get everything back to spec .
  13. fmc_smt

    Frustrating to park it all winter

    Bad ass svt .
  14. fmc_smt

    Frustrating to park it all winter

    I can't grasp the concept of parking a car due to weather . But then again , maybe that is why I live in Arizona.
  15. fmc_smt

    C.Quartz Ceramic Coating Applied

    Best thing that has worked for me , strip wash (removes any oil or silicon products ) , iron wash ( removes any iron deposits ) clay bar ( removes any contamination left in micro scratches ) , cut and polish ( compound backed with a polish ) . I am a big fan of Adams products . For the the cut...
  16. fmc_smt

    325/30R19 on lowered S550?

    Depends on your off set , for comparison I used a tire cacultor to compare the tires with my set up . I am on 20 and running sport line springs 1.5 drop . What you want to run are shorter and wider then what I am running . Again it will depend on off set if you get a rub . Picture below for...
  17. fmc_smt

    Accurate boost numbers? Procharger

    Running a 18 on my 15 , and it does almost look stock
  18. fmc_smt

    Tire Size

    That is the stager I had , nice . But the toyos seem a little hard when boosted . Hell I lost it when I was n/a .
  19. fmc_smt

    Solarflare’s *better late than never* build thread

    Even on a lift it does that , pain in the ass to get it b stay back in when your going back together


Advertisement
Top