Search results

  1. Indiana Clevite rod bearings

    Looking for rod bearings Part number cb1442HN
  2. Indiana 5.2 cross plane long block /GT 350 heads

    I was keeping this as a “spare for an engine in of my 2015‘s . 5.2 /GT 350 heads Car is being sold so “spare” no longer needed . I am also considering using it in a fox body swap and curious to see what it makes NA/E85 . Ford says the 5.2 Alluminator XS is good for 580 crank with headers. I...
  3. Indiana Gen 2 Voodoo long block

    I have a bit of an obsession in keeping spare engines but decided to let this one go as keeping a “spare for a spare “ might be over the top even for me. I am probably going to sell the car and don’t want to be tempted to put this is in s Fox ...🥺 Details (I may be missing some ) Fresh build...
  4. S550 / 5.2 dyno shoot out -- 3.2 Kenne Bell vs Gen 5 whipple vs Hellion TT

    Interesting day on the Dyno. Decided to run my boosted "5.2" S550 Mustang GT's back to back on the same dyno/same day . KB car is a 2015 with BES built 5.2 . Bored and sleeved Gen 2 coyote block/Boss crank. Custom Ross 3.7 pistons(11:1 CR), Manley H rods/GT 350 heads with Ford racing cams ...
  5. Indiana Viking warriors for lowered cars

    Have 2 sets . Switched to the crusaders . $250 per pair. Prefer pick up but will ship on buyers dime .
  6. Indiana SW 1 7/8 long tube headers -used -$400 picked up

    pick up only .
  7. Indiana cat delete /magnaflow mid pipe $400 OBO

    Took this off my Coyote when i swapped to long tubes . Perfect sound . Pick up only in Indianapolis.
  8. Indiana MAC cat delete/magnaflow true X

    Took this off my 2018 when I switched to long tubes on new motor sounded awesome /zero rasp mid 900’s with Gen 5 whipple . No longer available from MAC without cats and cost up $1300 with them . pick up only $600 or best offer
  9. Indiana Want to trade built 5.2 motor/Tremec for stock motor and MT82

    Looking to return my car to stock as much as possible . I have some stock parts - but not the engine and transmission unfortunately . BES sleeved Gen 2 block coyote (5.2). Custom ross pistons Manley H rods with ARP 2000 bolts .Billet OPG / crank sprocket Build spec available. GT 350 heads...
  10. Indiana 2015 Mustang GT /Magnum XL/3.2 KB/Sleeved 5.2 /GT 350 heads

    Too many cars and never gets driven hence 14,600 miles New motor has less than a 1000 miles on it . Motor. BES sleeved Gen 2 block . Custom Ross (5.2 ) pistons /Mahle H rods with ARP 2000 bolts . GT 350 heads with Ford performance cams (same spec as Voodoo). PAC springs /ARP heads studs . GT...
  11. Indiana 16 GT350 -Built motor-2.9 whipple

    Thinking of selling Tech pack , built / upgraded “brand new” Gen I motor - never previously run -upgraded to Manley rods, ARP Head studs , GT 500 head gaskets PAC valve springs and R phasers ....Billet crank/OPG gears .... Will include(or can return to stock ) Gen 3 /2.9 whipple , Spec twin...
  12. OPG upgrade ?

    The GT500 comes with larger OPG but word is they are still the same powder forged material used in the GT . Any concerns with adding power ? Does anyone make a billet gear ?
  13. 5.4 stroker coyote

    I am planning a “spare “ short block for my 18 and I came across this I don’t see the the correct bore pistons offered for the 18’s but If you start off with a predator block(has the same deck surface with required knock sensors bosses )and you get a “5.4” !! Add ARP main studs and you can get a...
  14. 5.4 stroker coyote ?

    I am planning a “spare “ short block for my 18 and I came across this I don’t see the the correct bore pistons offered for the 18’s but If you start off with a predator block(has the same deck surface with required knock sensors bosses )and you get a “5.4” !! Add ARP main studs and you can get a...
  15. GT TVS parts

    Clearing out my garage and have a bunch of crap left over from when I swapped the 8 rib for the 6 run that was on the TVS on my 12 .(I think ) If anybody wants it let me know ,otherwise I am going to junk them . There is a cracked tensioner and it’s replacement and a bunch of smaller ones...
  16. GT 3.5 whipple pulley -$100 shipped

    Less than 1000 miles
  17. GT Used 11 mm ARP head studs

    No longer need these . Link to new https://www.lethalperformance.com/arp-2013-2017-5-0l-coyote-12-point-head-stud-kit-11mm.html Came out of block that has now be converted to use the longer 12 mm ones $200 plus shipping or best offer if anyone wants them .
  18. Indiana DW400 pump installed in 2018 stock hat /new hose

    As stated in title-installed as part of the Stage 2 whipple on my 2018 GT . I must have got one of the earlier ones as it came with the rubber hose(instead of the corrugated one ) . It will come with the install kit that includes the corrugated hose (only thing you need out of the kit ) Looking...
  19. GT Mahle 4302 pistons

    I have 7 good used pistons out a failed alluminator block and a brand new one that replaced the one that had a hole . Engine builder said the used ones all checked out and I was going to use them to build a “spare” but turns out the “replacement “ Mahle had sent me was actually .005 over bore...
  20. GT 2015 Hellion TT/“predator”long block/fully built 6r80

    I have been kicking this idea around for a couple of years but I think it’s finally time to let her go . This is to just get started and I will clean thread up and add pictures as needed . Summary : New Engine - less than 1000 miles with predator based 5.2 short block /longer 12 mm ARP head...
Top