Search results

  1. Massachusetts FS: 15 Mustang GT PP/ Recaro's / Whipple stage 1/ Wheels / Suspension

    Information is below, its currently in painted form but has been wrapped 90% of its life as you'll see it black in several of the pictures. Really been babied it's whole life, garage kept every minute and serviced to high standard. Whipple has been on for about 1.5 years and it just got a brand...
  2. Just finished clutch install, no pedal!!

    I just finished a clutch install, new throwout bearing and stainless line from steeda at the same time. Everything went well the trans slide in easily without bolts. When I finished I’m pumping the pedal now and have done so now almost 200 times and it’s still not coming back on it’s own and is...
  3. Driver cat pipe exhaust clamp broke

    Just finishing up my transmission and the ball and socket style exhaust clamp that’s used on the stock driver side cat pipe pipe that connects it to the mid pipe rusted clean off. Usually stuff is easy to find at fordparts,com but I can’t seem to get this part number anywhere. It appears to be a...
  4. ARP flywheel bolt torque spec

    I bought the arp flywheel bolts and I can’t seem to get a straight answer on the torque spec. The stock spec ends up being 59ft/lbs but Cj pony in his video says 74ft/lbs. Thanks
  5. Slave cylinder retaining clip broke

    Hey folks, I broke the small black plastic clip that retains the slave cylinder line in the transmission hole that goes out to the trans line. Anyone have the part # on this?
  6. Does this slave cylinder look broken? Pic included

    I received the attached brand new for my upcoming clutch job and it seems to be off-centered and possibly damaged in shipping. Can someone confirm if this seems off?
  7. McLeod RXT - McLeod flywheel or Lethal flywheel (both steel)?

    Any difference or preference? Same price so I wasn’t sure which to get.
  8. New clutch, do I need new throwout bearing?

    I’m getting a Mccloud rst twin disk with aluminum flywheel as my stock clutch went out on me. Do I need to order the Mccloud throw out bearing or a new ford one to replace as I do the clutch? I’m just not sure if it’s an item you’d want to replace or if you can use the current one.
  9. Stock driveshaft a lot of movement

    Hey folks, I have the common thud noises and obvious driveline slack that most have. I’ve come to deal with it more or less and MGW and diff bushings help of course. I was under the car today and noticed a lot of play in the center section of the driveshaft where it goes into the carrier...
  10. MGW x spec, will my Raceseng knob fit?

    I have a Raceseng weighted knob and I love it, I don’t want to get ride of it. It current has an adapter on the stock shaft that allows it to connect. I don’t have the specific size but it’s larger that the stock shaft. I’m thinking standard, would I use the adapter still or could I select an...
  11. Clutch slip???

    Hey folks, So I’ve had this issue for awhile now, it seems to happen on initial onset of a WOT pull or quick blip of gas at times. I have a whipple Stage 1 with 30k miles on my manual gt pp. It essentially feels sluggish or to not come on right away and then will come on normally after that...
  12. What to add to cart when buying clutch

    So I have a 15 mustang gt with stage 1 whipple kit with 30k miles. It had stock clutch and seems to start to slip on me. As I look at the numerous options from Mccloud and spec and others I wonder what is truly necessary when replacing it at my mileage. Do I need a new flywheel with a new...
  13. Upgrading Whipple setup, need advice

    I have a stage 1 gen 3 on my 15 mustang pp gt and I want to upgrade the power. I do not want to get the whipple stage 2 tune I would like to go custom with PBT or Lund. Obviously I’ll need the larger throttle body and ngauge tuner. I don’t have plans to run e85 so it’ll be 93 octane. I want to...
  14. Whipple tuning options

    So I have a stage 1 kit now, I know down the road I plan on upgrading. Instead of going with the stage 2 upgrade that just retains the flare tool and downloaded tune, I wanted to go with a custom tune. My big question is what I’ll need to have to actually tune it. My understanding is that the...
  15. Oil smells like fuel - what to look for?

    So I was emptying my catch can yesterday and notice it smelled a lot like fuel. I didn’t think much of it but then I pulled my dipstick today and noticed the same fuel smell. Ive installed a whipple supercharger 100 miles ago. My thought is possibly some leaked in there from pulling the old...
  16. Whipple smooth pulley wobble, concern?

    I’ve been noticing 2 of my smooth pulleys on my whipple kit seem a bit wobbly. I tried my best to show it on the video but I’ve played with the belt and it’s def not a belt placement issue. When standing above you can see the lateral movement in the pulley. Is this something I should be...
  17. Cats bad? Exhaust loose? What’s the deal!?!?

    Hey guys, So obviously I, like many have ran the stock cats on the headers for some time (27k miles) and just recently whippled. The car sounds great for the last 100 miles with the h pipe to roush quads. Just yesterday as I’m out driving and get on it around 3k I start hearing the landmower...
  18. Did the header CATs finally go?

    Hey guys, So obviously I, like many have ran the stock cats on the headers for some time (27k miles) and just recently whippled. The car sounds great for the last 100 miles with the h pipe to roush quads. Just yesterday as I’m out driving and get on it around 3k I start hearing the landmower...
  19. Shawn Foster whine mod Review

    So I’ve have the stage 3 kit on the car for about a month now and I couldn’t be happier. Firstly, Shawn is a local New Englander to me and couldn’t have been more helpful. I call and he walked me thru my questions and concerns mainly around the suction now and baffling the tube. He was even...
  20. Whipple CHT’s

    hey folks, So I recently finished my stage 1 complete whipple kit install. Everything seems to run great, IC pump is flowing, belts have no sounds and coolant is where it should be/heat is working perfect. My question is around temps. As I drive around (20-30 min drives) I notice in traffic and...
Top