Selling my 900+whp 2017 Mustang GT (base) in Oxford White with 12,600 miles. This car can easily drive hours to the track with the AC on, run a 9-sec pass, and drive right home. It dyno’d 903whp/830wtq @ 15psi before the bumper exits and valvesprings were installed, so it should make a bit more...
I currently have 3.15 gears in my car with 315/50/17 tires (29.4" tall!). I believe swapping to these tires from the 305/45/17 tires I used to use caused my gearing to be too tall, slowing the car down.
I think switching to a 3.31 pumpkin would be the best move to make rather than going back to...
What intake manifold do you guys think is best for my setup (excluding billet)?
Hellion top mount 5562 BB turbos @ 12-15 psi
Stock bottom end w/ OPG
PAC 1234x valvesprings
ARP head studs
GT350 intake manifold (unported)
Those mods seem to...
Have you guys used the Dragy device? I have one on the way and I'm curious what you guys are seeing for 60-130 times specifically.
It does 0-60, 60-130, 1/4 mile, 1/2 mile, etc. From my research, accuracy is within 0.03 seconds compared to track times and within 0.2 mph.
It has a leaderboard...
Aldo Welds TT Kit -18psi
Lund Racing Tuned
Circle D Specialties 258mm Converter
UPR Products Suspension
Manuel Gomez 6R80
I have nothing to do with this car. Just saw it posted on FB and thought I'd share. Owner is Bryan Luna.
Have any of you turbo guys added boost-activated cutouts to your exhaust? I've been strongly considering it but I don't want to go through all that effort for no benefits.
Currently looking at LoudValves...
Do you run restrictors in your oil lines? I'm having a bit of a dilemma about it.
Precision says DO NOT run restrictors with journal bearing turbos.
Hellion supplies a 0.035in restrictor with both their journal bearing and ball bearing kits.
A friend lost his turbos and he's thinking...
Selling a brand new N2MB Wot Box and 2-step. Allows you to flat-foot shift your manual car and also gives you a 2-step for launch control (auto or manual).
Looking to get $160 shipped for it. Sells for $200 new.
I didn't see a thread on this topic yet but I'm curious. Is the 2018 GT intake manifold going to fit on the 2015-2017 GT?
If so, are gains expected since it's made for a higher-revving engine?
I came across the attached pictures on FB today.
I'm selling this SIRHC Labs Cortex electronic boost controller. It seems like an awesome unit but a friend sold me a different one for a crazy deal, so it's for sale! I bought it a couple months before my build so I'm past the return window. I never installed it or even removed it from the...
So I just found out the MSD 2-Step does NOT work with the 2016-2017 Mustangs as they changed the coil packs from the 2011-2015 models. Yes, those years are right; it only works on the 2015 S550. I just called MSD and I asked if they had a solution for the 2016-2017 cars and they said "nope". So...
Anyone have any pics of an S550 on Darkstars? Preferably with 17x10.5" wheels in the rear but anything helps!
I ordered 18x8.5 fronts and 17x10.5 rears. I can't find another car online with this setup so I'm hoping one of you guys might have a pic! :cheers:
Hey everyone! I've been on the forum for awhile now but never did a build thread. I figured it was time for one now that things are starting to get serious.
Right now, the car is Procharged. It dynod 650whp/528wtq @ 11 PSI on 93 octane (with the stock intake manifold, not the Boss 302). I...
Have any of you tried adding a muffler or resonator to this catback? My car has catless headers with the Solo Mach XV catback and it's incredibly loud at WOT and it gets a little raspy. This seems like a solid solution but this catback has a different design than many others and I haven't seen...
I currently have two nGauges: one regular and one Lund (don't ask lol). I have a proper tune for the car on each nGauge from different tuners. The car is currently flashed using the regular nGauge.
So the question is: Can I plug in my Lund nGauge and flash that tune without any other steps...
I have an MT82 and I just had a Mcleod RST clutch, lightened steel flywheel, and SS clutch line installed. Starting the day I got the car back, the shifter would get stuck in gear at 0 mph if I go from 1st gear to neutral or 2nd gear to neutral (it'll happen in any gear). It requires...
Just got an email from Lund about a firmware update for the nGauge. Download is at the bottom of the instructions.
Hey guys. I'm about to replace my stock clutch with the Mcleod RST twin disk clutch, steel flywheel, and SS clutch line. They've already been delivered so I'm just about ready.
Should I replace the master cylinder, too? If so, which one is recommended? Specifically for boosted applications...
Hey guys. I'm having an issue when I view the site on Chrome on my desktop. For some reason, my mouse wheel won't work for scrolling through the site. Any other tab I have open works fine. Sometimes if I refresh the page, it fixes the issue. Other times, it doesn't.
Any idea what could be...