Search results

  1. Has anyone installed the 2021 GT500 strut tower brace on an 18+ GT with a TVS blower/Whipple Without lowering the engine?

    From everything I see it should fit no issue. I’m curious if anyone has first hand experience.
  2. Anyone have the actual Cobra Jet hood from Anderson Composites/Ford Performance

    Wondering because on the Anderson site it says requires removal of wipers. This just doesn’t make sense to me. Does the hood come up just a little more and prevent the hood from being opened properly? The hood can only come up so much before it rubs so I would like to know exactly what’s going...
  3. What are people data logging with now that there’s no Ngauge?

    the RTD seems a little ridiculous if that’s the only option to datalog. It’s not exactly as easy as the Ngauge made it or the SCT X4 is etc. what is anyone using for HP tuners or Lund for example now to datalog. It actually amazes me that there no company capitalizing on this clear easy way to...
  4. All boosted supercharged 18+ how much PSI and RWHP you making on stock motor.

    Wondering because I know everyone is different and there really is no right answer. Comes down to the tuner and timing essentially. So what you guys at. Specifically with psi.
  5. How much hp/tq can the stock clutch on an 18+ handle?

    I see a few posts about 15-17’s but from what I have heard the gen3 stock clutches on the 18+ hold a little more. I’m 700 wheel and haven’t had any slip so I’m wondering what’s the limit here before a clutch upgrade would be considered necessary power wise.
  6. How many of you need to have traction control off for it to not engage in second? (MT82)

    I have an Edelbrock 2650 TVS stage 2 and custom tune. The car is very powerful down low rpm. the traction control will at around 6000rpm second gear (MT82 )engage which then basically as a fail safe if traction control is on the mustang ford setting for traction control kicks in and closes the...
  7. Whose riding Toyo Proxes r888r 325/30R19 in the rears?

    Is there any sort of rub inside the fender liner of the quarter panel with less than an inch drop. I already know there’s no rub on the outside itself with this size tire as they are shorter in diameter than what I currently have which is 305/35r19 with a .78in drop from ford performance. I...
  8. Wondering how many boosted have ARH high flow cats?

    Just wondering. I have high flow ARH now but will change over to catless next month. Just curious how many had high flows after doing boost specifically with American racing headers. I’ve seen some horror stories with high flows considering factory cats are usually never an issue especially...
  9. Would like to purchase Ford Performance Half shafts.

    Hey just looking to see if anyone on lethal can help me out. The price was changed from the usual $1710 Lethal sold for to $1800 while other shops like Jegs, CJs and LMR have kept the “MA” model at the $1700-$1711 mark. Obviously I’m ready to purchase so please let me know what is possible to...
  10. Has anyone bought the Trufiber A86 (GT500) hood?

    It seems like no one on here has any Trufiber hoods installed, fiberglass or Carbon fiber on these forums. I only ask because their GT500 style hood has the option to buy a carbon fiber louver separately to replace what it comes with and to me that would look awesome but I can’t find any one...
  11. Are LPX and LPXHD clutches made by MCLeod?

    not that, that is a bad thing but I would like some clarity. I realize they are not fully “rebadged” RST and RXT clutches as they use Kevlar instead of ceramic. But I have heard over and over the clutches are fully using and manufactured by McLeod. Just wondering. Like I said in no way is...
  12. For anyone riding on staggered 20x10 and 20x11 what size tires?

    Some people say they go with 315/35 rears and 275/35 or 285/35 fronts. To me that seems waaaay too big for the rear. 315/30 rears with 275/35 fronts seems more appropriate and give it an even ride. A 35 profile makes it 1.3 inches taller in diameter than stock and it just seems excessive in...
  13. Anyone know where I can get a new set of OEM 2020 GT500 rear splash guards?

    Need a set. Can anyone point me in the right direction. Can’t find a pair anywhere to purchase. Might have to go to the dealership. would rather just order online.
  14. Is there anything different between the ecoboost gauge cluster and the Ford Performance one

    I’m wondering because I want to switch my regular PP cluster out for one since I am boosted. I know the ecoboost one is made by Ford and usually Ford performance parts are made by outside companies making them technically not OEM. Just wondering if there’s a difference or was it more to market...
  15. Why is everyone buying the replica GT500 rear diffusers instead of OEM?

    This link here has the whole kit made to be fully compatible with an 18+ S550 and includes the under carriage close out panel. Sure it’s a few dollars more but it’s OEM and guaranteed perfection. https://www.levittownfordparts.com/sku/gt500diffuserkit.html
  16. Anyone install the lower bullit grille on their 18+ and if so does it work with the safe smart package?

    Wondering. I had a mishap and need a new upper grille was thinking about going back to stock upper but only if I can use the lower bullit grille and only if it works with the safe smart package. I know the bullit doesn’t have an option for that packs so I was wondering if it works with it.I...
  17. Anyone with a 2018+ Cervinis Cobra R hood

    If so how you like it. How’s the view with the 2.5 inch hood cowl etc.
  18. What is the difference between Gforce 31 spine axel and ford performance 34 spline axel by Gforce

    They are both rated for 1500hp and both have anti wheel hop techno logo but seems like ford performance might be a better priced product. Also anyone know what the slightly cheaper Gforce renegade axels are rated for hp wise?
  19. Has anyone looked into the Anderson Composites GT500 rear diffuser on the 18+ S550

    It says GT500 only but when I called Anderson they basically said they say that because they can't guarantee fitment because they only test it on the GT500. They basically told me there's a rear underbelly that connects to the rear diffuser but like the gt350 rear diffuser that fits the 15-17 no...
  20. Anyone with an Edelbrock Stage1? Opinions...

    I have read good things about this blower coupled with a custom tune. Also I was told by Edelbrock that the stage 1 uses stock injectors. Is that the case? Any one who has installed this please let me know your opinion and any one else for that matter. Opinions welcome.
Top