Search results

  1. Ohio Spec SS-trim twin disk clutch and flywheel for sale

    Have a spec twin disk that has seen 4-5k miles of use. No strip, just street with an occasional pull here and there. Appears to be in good condition, pads still look to be in great shape with lots of life left, tried showing as much as I could in the pics but if you want any other pictures let...
  2. Broken clutch spring perch with Pic.

    So I looked under the dash to inspect my clutch safety switch and I saw that this spring seems to be off its perch. I tried pushing it back on but it won't stay. Is there supposed to be something that keeps it locked in place? What happens if I pull the spring completely off? Any help would be...
  3. Keep Paxton and re-gear rear end or sell and get a Whipple?

    So I've never really been a fan of the 3:31 gearing in my car, they just feel way to long, especially for a car thats powerband lives higher up in the RPMS. That said, most people seem to say in boosted mustangs you want the longer gearing, and when I'm on the go pedal taking it all the way up...
  4. What's the issue?? With Video.

    As some of you might have read I'm having some shifting issues with my car. I started a thread about it possibly being TOB related, however unfortunately that thread got little traction. My main issue I had was with high rpm lockouts, however I noticed that I couldn't shift into 2nd gear when...
  5. Throw out bearing questions...

    I posted this in the transmission section, however doesn't seem to have as much traffic over there so I'm posting this over here. Hopefully I can get some advice from people knowledgeable on the subject. I installed my clutch last summer after having had my trans rebuilt. When it came to...
  6. Throw out bearing questions...

    I installed my clutch last summer after having had my trans rebuilt. When it came to putting everything back together, I did not bench bleed, or do any kind of bleeding on the TOB/Slave cylinder. I was under the assumption that it did not need bled in the traditional way as it didn't have a...
  7. Can't shift into 2nd when car is above 40 mph.

    Hey guys, just like the title says, I have a 2015 mustang gt manual that I can not shift into 2nd at over 40 mph, can't drop it in, Rev match nothing. As soon as I get under 40 it'll slide right in ;) transmission is a Ben calimer stage 2, clutch is a spec p trim twin disk. Any ideas why this...
  8. Bypass valve whistling...

    Hello all, I have a 2200Sl kit on my car with the bv57 bypass valve. Day before yesterday I was getting on the car a bit and when I was done I noticed the bypass valve had started whistling when under vaccum around 2700 rpms and up. If I stab the throttle and go into boost it goes away, but...
  9. Spec twin disk clutch review

    Hello all. Figured I'd write a little review of the spec SS trim super twin disk clutch since there isn't much out there on them for our cars, at least not that I saw. Seems that the most popular options are the mcloed Rst or Rxt or the mantic. I've never owned a twin disk clutch before, so I...
  10. Shifting issues. Not sure what I should do.

    I posted this in the transmission part of the site, but it doesn't appear that it gets as much traffic as the general section. If it needs to be deleted I understand. Hello! So, a few months back, due to a horribly missed shift I broke something in my MT82 and I was not able to go into 5th...
  11. Having shifting issues, not sure what to do.

    Hello! So, a few months back, due to a horribly missed shift I broke something in my MT82 and I was not able to go into 5th gear. After that, I decided I never wanted to have shifting issues and sent my trans to Ben calimer for a stage 2 rebuild, bought a spec twin disk clutch, and mgw flat...
  12. Ohio WTB: Decent set of headers.

    Looking for some off road headers with factory connection with 1 7/8 primaries. let me know what you got! Thanks.
  13. Bypass valve and wastegate questions.

    I have a bv57 bypass valve and was reading that it has some adjustment, however it seems that most say to just leave it open. I'd like to adjust it a little to make it close a little sooner than around 0 vaccum to help part throttle a bit. Is this OK? I assume that the only real issue may be...
  14. Ohio WTB: Ben Calimer stage 2 or 3 MT-82.

    Just like the title says. Looking for a stage 2 or possibly 3 from Ben. Must be in good working condition and have a receipt for the build. Thanks.
  15. Bad A/C compressor?

    Well, I think my A/C compressor is bad, but I want to be 100 percent sure it's that and not something else before I buy one. I've been trying to read and it looks like the evaporator behind the dash sucks too, and could possibly be leaking and maybe caused the compressor to fail? Is there an...
  16. 12 psi on 93 on gen 2 coyote

    Looking to put in a 12 psi spring in my wastegate on my beefcake torque booster, but wanted to get some opinions here. Looks like the guys who run a 3.6 pulley on their paxton 2200sl are seeing about 12 psi @ around 7500 rpms. They are only seeing it right before shift, so curious to if it would...
  17. Ohio WTB: Paxton 8 rib 3.6 pulley.

    Looking for a used 8 rib 3.6 pulley for a 2200sl. Doubt anyone will have one, but worth the post. Thanks.
  18. Ohio Wtb: Paxton 3.12 or 2.95 8 rib pulley.

    Just like the title says, looking for a small pully for my 2200sl. Thanks.
  19. Paxton supercharger noob questions

    So, me and a buddy just finished up my opg/cg '18 mani and paxton 2200sl 8 rib install a few days ago, and I have a few questions, mainly concerning the bypass valve and its operation. I have the upgraded bv57 huge monstrosity one and It seems that it doesn't actually close unless I'm at WOT or...
  20. Injector height help...

    I bought a set of DW 72# injectors off of a forum member here that came off of his whipple kit when he upgraded his fuel system. Well, I am in the middle of installing my 18 intake mani and paxton kit and it turns out these injectors are to short. I didn't know they came in different heights...
Top