Search results

  1. Roush CAI on HPP EB?

    Anyone install one of these on the EB HPP? Its a no tune necessary on the EB, and Roush told me the same, they also said it would fit; I know the EB and EB HPP have different turbos, and my concern is the connection to the CAI if the EB and EB HPP are the same diameter since they are different...
  2. Clinched Spider top back from paint!

    Just got it back this past weekend and my wife and I both love it!
  3. Too much octane or just a waste on a Roush boosted tune?

    My 21' has the Roush tune on it for the Phase 2, which from what I have read is tuned for 91 min/93 recommended; Found a local station that has 116 octane, and one that has 110 VP Race fuel, I know that Roush recommends not adding "octane boosters" as it may cause issues (not sure if it is...
  4. What wheel size are you running on 305/35/19 Nitto NT555RII's?

    I am having quite the time trying to decide on wheels for my 2021 GT (PP), and I already have a set of tires for the rear- 305/35/19 Nitto's...recommended wheel size is 10/11/12, with the 11 being "optimal". Anyone running these on a 10" wide wheel? If so, how well does it fit? It opens up a lot...
  5. 9.5" up front, 11" rear...too staggered?

    So I have a set of the Mach 1 HP wheels on order with Ford, and the more I read the more I think I don't want a 10.5" up front....while looking at the what is available I did find the PP2 comes in 2 sizes, you can get a 9.5" or 10.5" for the front and a 10" or 11" in for the rear....I already...
  6. Ohio 2021 GT take off parts (intake, fuel rails, injectors, throttle body)

    Taken off car at 675ish miles, removed by dealer when SC was installed. I can provide any close up pics, and would prefer to sell locally (it may still have some fuel in the rails or at least it still has a strong gas smell to it, I dunno). Intake, fuel rails, injects and throttle body, would...
  7. PCM/BCM adjustment for different tires/wheels-Roush tuned

    I am just full of questions on tires this week, but I did finally get new tires/wheels ordered, and I am on my desk happened to be the Roush warranty (just got it back a week ago from adding a Phase 2 to it, which has prompted my need for new tires). Long story short, I am reading that PCM/BCM...
  8. Tires and wheel sizes...ughh...some questions

    So, I think I am going to try the Vors D38 for my back wheels as they have a 19x11 that looks really close to the PP1 wheels. Since I have added the Roush Phase 2, these P Zeros just make it unable to hook up at WOT. My original though was to go with the D38, with a Proxe R888R, in 325/30/19, I...
  9. Vors DG38 good value or junk?

    I need to go with a bigger set of rear wheels on my car. Currently I have PP wheels on it, and honestly that was one of the reasons I got the PP, I really like the wheels> Sadly they are only a 9.5" and need to go with probably an 11" to correctly fit a 315mm tire on them. I found these and...
  10. Forscan question

    I didn't see a specific forum for Forscan, so I figured I would ask here. On my 2021 GT, with the 401a dash, on the left side inside the tach where it is configurable to display the gear the vehicle is in (Manual GT). My wife has a 21 EB HP, and she really liked that about the GT but I cannot...
  11. Started on the Clinched Spider Top install (with antenna relocation bracket(s))

    Last night I got the top installed and test fit on my wife's convertible. My kit included 1 antenna relocation bracket, but no instructions on where to put it, and the bracket isn't very intuitive to where it goes. Thanks to @CJJon who gave pretty detailed instructions on relocating the drivers...
  12. Undisclosed SOLD Battery cover -drilled for hood struts.

    Battery cover fits 15-21, drilled for hood struts...took them off the car and put a new cover on. $30 plus shipping.
  13. Decided on Roush SC, now what else?

    Decided on which one, and where its being done already for my 21GT (car is 5 months old, 700 miles, so I am going with Roush due to the warranty. Here is what I am planning and being very new to the forced induction world, is there anything else that I "should" do when adding a SC? Roush...
  14. MRT hood strut issues?

    Ordered a set of the MRT no drill hood struts and they don't appear to be working as expected- I have removed and reinstalled them 2 times, and I am pretty sure they are installed correctly, but I am wondering if the hood is just different enough of a 2021 from previous models to cause the...
  15. Roush vs Ford Performance? Differences--same?

    Totally new to SC for anything so I have a couple of rookie questions: The kits I am looking at: M-6066-M8- From Ford Performance - this lists a 750hp/670 ft/lbs Same Part number from CJ Pony Parts lists this kit as 700hp/610 ft/lbs Now on the Roush website they offer: Phase 1 kit- this reads...
  16. GT350/500-Mach1 Performance Pack spoiler on a GT with Performance Pack

    Anyone done a swap from the GT Performance pack ( JR3Z-6344210-AB ) to the GT350/500/Mach 1 Performance pack ( M-16600-FP ) spoiler? Looking at them in photos online looks like they have the same mounting hole locations? Not trying to make a fake Mach 1, but I really want a black spoiler on my...
  17. Order timeline questions

    HI All, First post here, but have had several Mustangs over the years, and I come from a Ford family. Over all the years I have purchased my cars, I have never ordered one, so this is uncharted waters for me, and my dealership isn't too great with the process as they are typically a large...
Top