Search results

  1. Rev/Shift hang and launch assist

    So after my shakedown pulls, the tuner is now in the process of fine tuning some things. I told him during the break in that the car is hanging on shifts, which not only was a departure from what I was used to, I was concerned it was the throttle blade sticking. The tuner loaded my base file...
  2. Wiper Blade Specs

    Okay, I've searched. I can't seem to get a straight answer. What are the wiper blade specs for driver and passenger side? The manual is silent. I've seen 22 and 19. I've also inputted my vehicle info to Rainx's website and it returns 20" for both sides. I'm sure there's probably a small...
  3. Whipple GT350 Final Draft Pulls

    Got the heavy lifting done this afternoon/tonight. Car made 1082 and 863 on 19 lbs of boost and 21 degrees max timing (very very end). Shorting the redline at 8k. Made 1045 and 857 on 19 degrees. (only 8k redline) So the car is still picking up good power/degree and loving what we throw at...
  4. Best socket for extended Titanium Lug nuts

    I searched, couldn't find what I needed. I have a set of the Exhibitions of speed Titanium extended lugs. I bought this socket but it has in interior shoulder that prevents biting the entire length of the hex. Amazon.com: ARES 70021-1/2-Inch Drive 19MM Non-Marring Impact Lug Nut Socket -...
  5. Adapter fittings for AN trans cooler lines

    Does anyone happen to know what fitting will work on the trans cooler to convert the factory hard lines to AN fittings? I have the fittings and conversion already for the transmission side. The compression fittings at the hard line are working but they're showing signs of sweat and I'd rather...
  6. Adding a pump booster (location)

    I currently have dual 40 amp (fused) legs with relays. When adding in the booster, it goes between the fuse and the relay correct? (to protect the booster as well as the rest of the system).
  7. "S H E L B Y" inset letters....carbon fiber splitter

    I have a CF splitter. It doesn't feature any insets for the shelby letters. I've purchased the acrylic letters from Kim and would like to stick them on it. But I'm struggling with the best way to lay them out so they end up exactly as OEM. They're double sided sticky and I also don't want to...
  8. Ford Part Number for the Rain Tray

    Now that the 500 has been out long enough, perhaps someone can help with identifying the part number for the rain tray. I see that FRPP is selling the CF vent option (that comes with rain tray). Has anyone had to order or replace just the rain tray?
  9. Screen upgrade options

    I have a 2016 with "base" radio system (you know, the pathetic calculator screen). I want to upgrade to a larger screen and my biggest requirement is that I be able to run Waze while the car is moving. I won't say I don't care what the cost is, but I'm not afraid to spend money if it's...
  10. FL 2087 update (interesting information)

    So I spoke with the vendor that I have a backorder through today. His last update from the supplier was 20 December and it was basically "missing component parts, no estimated ship date." This is from one of the largest fleet suppliers in the nation with some ENORMOUS contracts. He said all...
  11. "Would you rather.....?" GT350/Shelby owners and their strange sensibilities

    You're in need of life saving, complicated and dangerous surgery to prevent your demise. Your only 2 options are, a surgeon who's highly esteemed but never done the procedure before, or one that's done the procedure once, but failed and the patient died. Which do you choose? Or even more...
  12. 2015+, best gauge lighting control source?

    Best place to getting dimming inputs for aftermarket gauges?
  13. Public service announcement, Ruvnuts, dont make this mistake

    So I bought a rivnut tool with nuts that you see on Amazon, ebay, etc. I'm installing a set of canards and needed it for that, but wanted it for future stuff too. The canards arrived and I had already purchased the black anodized M5 bolts. The canards came with what's called a slotted nut...
  14. Whippled 350 owners, anyone removed the grill box out?

    Has anyone removed this upper frame out of the grille? I have the mishimoto radiator and the whipple oversized HE. I also have trackspec hood louver. I'm wondering what affect it would have on: 1) air velocity across the upper side of the "layer cake" of HE, radiator and AC condenser. 2)...
  15. Anyone done a Magnum XL swap on a GT350? What did you do for TFT?

    So I'm beyond frustrated with some of my build. I finally tracked down the "TFT" (transmission fluid temperature) sensor and after taking a risk it was the wrong part (lookup the part number and it's improperly labeled as the VSS). I've bought a 1/2 NPT to 1/8 NPT plug adapter to use the...
  16. Ford (S550) fuel level sending unit and aftermarket fuel gauge

    Does anyone happen to know what the ohm range is for the OEM fuel level sender and if there are any aftermarket fuel gauges that will work if I tap into the sending unit signal?
  17. Whipple Gen 5 boost reference port

    There's a plug on my gen 5 case at the front passenger side (just above the port for the bypass line) and it's a 1/8 NPT plug. Is this an acceptable spot to use for boost reference to the fuel regulator? I think there's a port in the rear but between IAT2 sensors, fuel dampeners and my fuel...
  18. Parts gurus, need help finding/identifying trans temp sensor part #

    I sold my 3160 and left the temp sensor in the trans. Now I need to buy one (preferably OEM) and I'll work out an adapter for my Magnum swap. It never occurred to me that the Magnum wouldn't have a temp sensor. If there's an easier path (i.e. someone knows for sure a different temp sensor...
  19. What's everyone using for vacuum lines

    For boost reference to pressure regulator, boost gauges, bunch blocks, etc. I can't find any of the really stiff poly line (that doesn't bend or radius well) all the crap I can find is the flexible silicone or rubber line (and I'm not convinced it'll translate pressure that well).
Top