Search results

  1. Salesman told me I don't need to do a service @ 1600 Miles

    Y'all didn't redline your cars under 1000 miles to get a good seal on everything? I think I hit 1600 miles the other day and I've definitely gotten in at least 5-6 7200 RPM pulls in. I don't bounce off the limiter. If anything this car needs an 8000 RPM hard redline so I don't have to worry...
  2. 2022 Mach1 notice this under my hood

    My PPF/Ceramic guy had fun removing those and had to undo the entire hood lining just to properly PPF the hood and clean around those vents. It was a pain to get to one of those.
  3. Ford Racing FL820 oil filter?

    I was about to ask what's wrong with the FL-500 filter? I have some left over from my 17 GT I plan on using.
  4. If buying Long tubes , What or who’s fit the best?

    None because I'm not taking a risk on cheap quality stuff. I'm glad it worked out for you.
  5. Borla Switchfire Xpipe Installed!! Sounds fantastic!

    Sounds good man. Even that stock exhaust sounds incredible. We're really blessed with a good stock axleback. Your microphone also picks up the tone quite well. I would get the Switchfire if I didn't have Kooks on order. Going to do a custom setup in the mid section to deal with the...
  6. What's your Mach 1's nickname?

    "The Mustang" I guess? Haven't really named cars that I've bought. ForSale100kLOL_ADM?
  7. If buying Long tubes , What or who’s fit the best?

    I would say it's not worth the money. The goal is to keep the heat inside the tubes and ultimately out of the engine bay. By the time you're reaching the mid section of the exhaust and there aren't many components impacted by the heat of it and not to mention the temp of the exhaust has...
  8. Best Resonator Delete for Active Exhaust

    None of them sound good with headers which is why I'm going to do a Stainless Bros 3" resonator/muffler in the center and keep my stock active exhaust for my Mach 1. If no plans for headers, pick your flavor or X or H.
  9. Fuel MPG

    Right, it only applies to the manual.
  10. Fuel MPG

    I just highly recommend that someone doesn't buy a Mach 1 for daily duties. You will get wrecked on MPG if that's a concern for you. The gearing especially on the Tremec I think makes it a bit worse. Probably why we all have the gas guzzler tax, lol.
  11. 2022 Official Mach 1 Order Tracking Thread

    Still no window sticker on my 11/2 re-order of my canceled 21. I'd have been long gone by now if I was still waiting on this car to be made.
  12. Fuel MPG

    I'm averaging a solid 15.6 MPG on my Tremec, HP in 1600 miles. I might get 18-19 if I did more highway driving but it's a lot of shifting and city for me.
  13. If buying Long tubes , What or who’s fit the best?

    If you happen to get a set that fits properly and doesn't rust out after a year, go for it. I'd rather buy a quality set but to each their own.
  14. MGW Shifter for Mach1

    Doing the BG fluid swap on my 17 helped a lot. I think I may do it on this car too.
  15. Local Dealer Has 4 FJG M1's

    I complained that I lost my 2% under invoice pricing on my 21 Mach 1 I had ordered with Granger when I had to pay MSRP for my current one I found. In the grand scheme of things, it feels like this WAS the discount which is really sad.
  16. Mach 1 Exhaust Pipe Sizes

    I see you did a Kooks X-pipe. Are you running an aftermarket axle back or did you keep your Mach 1 axle back? Did you need reducers behind the X-Pipe if you connected to the stock pipes?
  17. Mach 1 Exhaust Pipe Sizes

    Looks like he's on Lund. I wouldn't expect the stock tune to adjust to the full potential of adding the headers on. The CEL will usually come on if you're cruising on a highway at the same speed. Just run a couple spacers on the secondary O2's and you'll be fine if that does happen.
  18. Mach 1 Exhaust Pipe Sizes

    Yeah, I read through about 98% of that thread. That's how I got info on Stainless Bros and also found out they are just down the road from me. One of the few true straight through designs.
  19. Mach 1 Exhaust Pipe Sizes

    So I have some 1-7/8" Kooks green catted headers on order and I'm looking to eliminate the bottleneck of the OEM connection to the resonator. So I'm starting with the 3" Kooks adapters...
  20. re: Zelek

    Thanks man! Hope you're enjoying it.
Top