Search results

  1. 2020 GT350R Heritage Build Thread (Heavy Build)

    Got some nice pics from the Daytona event.
  2. 2020 GT350R Heritage Build Thread (Heavy Build)

    😂 I know. It was just a little weird taking it off, when you get used to that T/C pulling power at the very limits, and then instantly taking it off, it’s very different and very noticeable. Just be careful is all. I know your going all out, just passing on what I felt when I did it.
  3. 2020 GT350R Heritage Build Thread (Heavy Build)

    there ya go. Take your time driving it, it’s very different when you don’t have that nanny kicking in, relearn the limits again.
  4. 2020 GT350R Heritage Build Thread (Heavy Build)

    Had the AC take a dump on me last night lol. Late getting home, I saw some what I thought was “smoke” coming from under the hood. My dad was following behind me also. I pulled off, popped the hood and heard a hissing sound and green fluid on the passenger side leaking out all over the place...
  5. 2020 GT350R Heritage Build Thread (Heavy Build)

    Finally got back on the track. got my original alternator back in, car is charging just fine. the other alternator that was giving me problems actually had a short to ground, we had a wire up against the heat shroud on the alternator plug. So we can fix that wiring and have a spare alternator...
  6. New in box GT350R steering wheel for 15-21 mustangs for sale $300

    thats why I was asking because it says 350r on his invoice
  7. Free Soler Prf. Throttle Bodies for GT350/500

    I track my gt350R pretty heavily, I’ll test out, I have a new race engine being dropped in and I can run this along with it. Regards 2020 gt350r
  8. 2020 GT350R Heritage Build Thread (Heavy Build)

    Went driving, had a charging system service now pop up. looks like the auto zone alternator I threw in while in Daytona is shit, car died on me right in front of the house. I’ll be dealing with that this weekend. lol. Fun stuff
  9. 2020 GT350R Heritage Build Thread (Heavy Build)

    Did the crank relearn with HP tuners. Worked like a charm. drove the car about 45miles, ripped on it pretty good, had no issues, no codes, no nothing. Just solid power and good response. Clutch feels good also, gotta wait till track day and see if this thing is 100%. if that’s the case we are...
  10. 2020 GT350R Heritage Build Thread (Heavy Build)

    https://thetuningschool.com/blogs/news/crank-sensor-relearn-using-hp-tuners
  11. 2020 GT350R Heritage Build Thread (Heavy Build)

    Looks like hp tuners can do it. I have devices for some other cars. I’m gonna try that out here in a couple hours
  12. 2020 GT350R Heritage Build Thread (Heavy Build)

    Looks like it needs a crank relearn. any tips?My scanner tool doesn’t have that capability, are there other ways to do it?
  13. 2020 GT350R Heritage Build Thread (Heavy Build)

    Clutch is in today. Gonna drive it tonight and test tomorrow. If everything is healthy with no codes and good shifting, I’ll report back.
  14. 2020 GT350R Heritage Build Thread (Heavy Build)

    Not as bad as I thought. But you can see where the heat built up pretty high.
  15. 2020 GT350R Heritage Build Thread (Heavy Build)

    Working on pulling trans for this clutch swap. I dont have a Long trans jack. Picking one up tomorrow so we can get this clutch swapped out. trying to get it to the track tomorrow night.
  16. 2020 GT350R Heritage Build Thread (Heavy Build)

    I would stay away from speedkore unless they send you pictures showing all the mounting points of the inside of panels. It should have OEM mounting points. What I received was not even close. And the quality of the surfaces was not even close. You can see waves and dimples in the surface, and...
  17. 2020 GT350R Heritage Build Thread (Heavy Build)

    ive never heard anything bad about them that’s for sure. And that’s. Solid recommendation thanks. I’ve been slacking on getting in Speedkore. I need to call them and let them know about the crappy parts. I’llupdate when I finally reach out
  18. 17 GT350 rear suspension mods

    The 350 has definite need for improvement in the suspension. There are areas that need work. I run allot of steeda components and they have helped the car around the track pretty good. Steeda Sub frame alignment kit, do yourself a favor and take the subframe bolts out and look how much gap is...
Advertisement
Top