Search results

Two questions for you, the link you previously posted for the harness (JR3Z-14A411-H) I will need to purchase two correct? also can you post a link for the harness (JR3Z-14A411-J) I can’t find it anywhere at all

I will be checking tomorrow, fuse slot #34 15AMP and Relay #59 right?

Got it sounds good!! Thank you. Just to clarify once I go into the As-Built IPC for that just change the first letter after the number to an E. And will look like the following below : 720-10-01-EXXX-XXXX ignoring everything else after the E

Just read your post on the link you posted, it showed you enabled IPC 720-10-01, Im kinda familiar with forscan (not the most knowledgeable) but is that the number I look for in the IPC as built tab and change? Or is that already a line in the IPC as built and is there a enable button for it...

Hey fellas! Im reading through this thread and is very interested in this! A buddy of mine is parting out his car with factory active exhaust and I will be purchasing his Mufflers, actuators, and the harnesses leading to the actuators and plug in under the car. My car has that harness plug in...

Can you tell me which wires I should test? Not very knowledgeable about wiring and speakers, still a learning curve would like to learn as much as possible

Hopefully I’ll figure out the issue, would really like it to work I got a little more base from changing out all the speakers but would really like the sub to work

I do not have a current picture of it but I pulled it directly from the car with the shaker system, thats also where I got the speakers and sub from

Is there anything I’m missing? I read almost every line in the forum and followed almost all directions lol

I have a 2019 GT Premium, I dont have the the B&0 System but I swapped out all the Front & Rear speakers with the shaker speaker, also swapped out the AMP Module and also added the sub and connected it to that blue connector in the trunk

I went ahead and changed the code to the one you provided and seems like the sub still isn’t working

Waiting on my forscan tool to come in the mail now, looking over your instructions just want to make sure im clear. On the code you provided 727-01-01 1850 F802 44D6 It says change the 4th digit from a zero to a 9 and the 8th digit from a 2 to an 8, I see the 4th digit is indeed a 0 but the 8th...

Will give that a try! I’m sure it wouldn’t but just to be safe will making changes in forscan in the ACM cause any issues with my tune for the car? I made a change before to add the Performance Shift Indicator and it had a little affect on my tune and I ended up having to reverse any changes...

Do you happen to know the steps to get it to recognize it? I have alittle bit of knowledge with forscan

This is what I have, is the fuse there or can it be added? Sorry for the lack of intelligence appreciate the help

is it the fuse panel behind the passenger side kick panel?

Yes I have the complete harness, When I was removing the Sub and components from the part out vehicle I made sure to have the same connections on my vehicle

Hey fellas, sorry to be late to the party. but I have a 2019 Mustang GT Premium and I purchased the Sub, Bracket, carpet liner, plug leading to amp and blue connector in trunk and also the DSP Module from a part out car which was all previously installed on. I swapped out the DSP Module and...