Post Pix of your S550 with aftermarket wheels and tires

[trewon1]

Next on the list, trying to figure out how to justify them lol.

Looks pretty good to me at stock ride height! I know it's popular to lower mustangs...but s550's look way better at stock ride height than older gens imo....

Sponsored

 

[KermiStang]

P51 101RF / Nitto Invo

 

[thebaldlatino5.0]

19" SVE R355's in gloss black. 19X10 squared with Indy 500's at 285/35/19. Stock suspension, obviously. Trying to figure out what springs to go with. I'd love to shrink that wheel gap but I can't go too low since it's a daily and I encounter a lot of tall shit to drive over.

I'm planning on running the same style set up. I lowered mine on Steeda's Dual rates(ive got the proaction adjustable shocks and struts to balance out) which lower it down about .75 of an inch all the way around. I don't know if I wanna do 19x10 square or 10 and 11 with 295 or 305s out back.

 

[dn1984]

SVE R355 19x10 front 19x11 rear. Nitto NT555 G2 285/35/19 front 305/35/19 rear

P7220006 by David N, on Flickr

P7220011 by David N, on Flickr

 

[Yellowsnowman]

Cars like the one above make me wish I had a mus......oh wait I do, just not as nice!

 

[tommyd]

Hey stangjp. Where did you get the hood vent covers? They look awesome. Thanks

 

[The_Mad_Patcher]

 

[Dave2013M3]

Here is my setup with the FRPP Track suspension kit. SVE X500 wheels in bright silver, 19X10 and 19X11 with 275/35/19 and 295/35/19 Conti Sportcontactextreme.

 

[Stage_3]

Looks clean!

 

[krisk]

Project 6GR Tens with Michelin Pilot Sport All Season 4
Front: 20x10 ET35, 285/30, 53.8lbs (8.4lbs less that stock PP1 setup)
Rear: 20x11 ET50, 305/35, 56.6lbs (9.2lbs less than stock PP1 setup)
Suspension: Steeda Sport Progressive Lowering Springs (1.125” front, 1” rear drop)
Results: No rubbing front or rear, tires don’t poke, no significant change in ride comfort.

 

[USMCtoARMY]

Soon...hopefully...these new bad boys will be mounted. ESR RF2 19x10.5 ET30 Rotary Forged.

 

[ShadowBlack5.0]

Before and After shots of my 2016 Mustang GT Premium.

Wheels: American Racing AR927 Wheels
Finish: Satin Black
Front Wheel Size: 20×9 Offset: +35
Rear Wheel Size: 20×10.5 Offset: +45
Front Tires Size: 255/35/20
Rear Tires Size: 305/30/20

Had to add 72.6mm to 70.5mm hub centric rings from US Wheel Adapters to get a flush fit as the bore sizes are slightly different.

Great look and very happy with end result.

 

[Nate_V8]

Went from stock 18s on 235s all around to 19x10/11 SVE R357s in gloss graphite wearing 285/325 Indy 500s. I'm happy I went for the graphite over black. I like the look of black rims but sometimes the lines of the black rims are lost in the shadows of the rim. I wanted a dark rim to match the the black trim while being able to still see the lines of the rims.

 

[ronnieb1958]

Went from stock 18s on 235s all around to 19x10/11 SVE R357s in gloss graphite wearing 285/325 Indy 500s. I'm happy I went for the graphite over black. I like the look of black rims but sometimes the lines of the black rims are lost in the shadows of the rim. I wanted a dark rim to match the the black trim while being able to still see the lines of the rims.

Great look!

 

[Mach VII]

Ace AAF-01 in 19x10 ET32 size with Conti ECS 285/35.

View attachment 500115

Sponsored