Shop recommendation in the Phoenix East Valley Area

[AZHowln50]

Anyone have any shop recommendations in the Phoenix East Valley area for a Vortech SC install along with OPG/CS and a dyno for remote tune? Thanks.

Sponsored

 

[AZ_whippleS550]

https://modernperformanceandtuning.com/ Kieth was good to work with when he did my oil pump gears and crank sprocket. I should add he is on the west side though

 

[Chris Barnes]

Automotive Diagnostic Specialities in Chandler is top notch. They are a one stop shop and can everything including tuning on their Mustang dyno. I've known the owner Greg for 25 years and is a no nonsense guy.
480-961-8704

 

[AZHowln50]

https://modernperformanceandtuning.com/ Kieth was good to work with when he did my oil pump gears and crank sprocket. I should add he is on the west side though

Thanks. I will check them out.

 

[AZHowln50]

Automotive Diagnostic Specialities in Chandler is top notch. They are a one stop shop and can everything including tuning on their Mustang dyno. I've known the owner Greg for 25 years and is a no nonsense guy.
480-961-8704

Thanks. This is much closer to me in Gilbert. I will be calling them for sure.

 

[Devil5oh]

Ive heard black market racing and dynocomp are good

 

[AZ_whippleS550]

Also for dyno time since you wanna do remote tuning Rudd Performance Motorsports has great rates on dyno time and allows remote tuning. They are in Tempe.

 

[zero_chance]

I could do the installs for a fraction of what the shops are going to charge you, but I haven’t had the time to get back into tuning, nor the space anymore for a dyno. Also down south in Maricopa which is no mans land for most of you northerners.

 

[AZHowln50]

I could do the installs for a fraction of what the shops are going to charge you, but I haven’t had the time to get back into tuning, nor the space anymore for a dyno. Also down south in Maricopa which is no mans land for most of you northerners.

I messaged you my phone number.

 

[AZ18yote]

I do most of my work and dyno testing at Black Market Racing. Great bunch of guys to work with. May not be far enough east for you. 40th st and Broadway.

 

[zero_chance]

Install completed for AZHowln50 as of this past Sunday. Boundary pump and crank gears and a Vortech. Saved him a thousand plus dollars over what the shops were going to charge and he just laid down 630hp and 508tq on a warm Arizona morning. Take a little drive, save a lot of money.

 

[AZHowln50]

Install completed for AZHowln50 as of this past Sunday. Boundary pump and crank gears and a Vortech. Saved him a thousand plus dollars over what the shops were going to charge and he just laid down 630hp and 508tq on a warm Arizona morning. Take a little drive, save a lot of money.

Yes zero_chance did an awesome job and the attention to detail was second to none. I learned a lot about the gen 3 coyote and zero_chance educated me me on all the systems. As an ASE Certified and Ford Master Tech I could have not been luckier to have connected with him. Glad he chimed in on the post and I will definitely be giving him more work as the build progresses. I highly recommend him to anyone in AZ looking for the highest quality workmanship. He even fabricated some custom parts and had all the tools need to work on the Mustang. Here are a couple of pics of the job.

 

[zero_chance]

Yes zero_chance did an awesome job and the attention to detail was second to none. I learned a lot about the gen 3 coyote and zero_chance educated me me on all the systems. As an ASE Certified and Ford Master Tech I could have not been luckier to have connected with him. Glad he chimed in on the post and I will definitely be giving him more work as the build progresses. I highly recommend him to anyone in AZ looking for the highest quality workmanship. He even fabricated some custom parts and had all the tools need to work on the Mustang. Here are a couple of pics of the job.

Very happy with the end result, as I know you are!

 

[AZ18yote]

Very happy with the end result, as I know you are!

That's awesome guys!

Strong pulls for the temps here too.

Glad to see the community is strong here.

 

[AZ_whippleS550]

Install completed for AZHowln50 as of this past Sunday. Boundary pump and crank gears and a Vortech. Saved him a thousand plus dollars over what the shops were going to charge and he just laid down 630hp and 508tq on a warm Arizona morning. Take a little drive, save a lot of money.

Hey, that's really awesome Next time I need work done I'll be sure to message you. have you done internal work on these engines? I have been thinking of throwing forged rods and pistons in.

Sponsored