Anyone tried M-5300-W on a non Magnaride PP1 car

[Dave2013M3]

https://performanceparts.ford.com/part/M-5300-W.

It says it works with both magnaride and non magnaride...wondering if it meant just the GT350. Sorry guys new to the S550 and not sure of the spring diameter.

Sponsored

 

[decableguy2000]

https://performanceparts.ford.com/part/M-5300-W.

It says it works with both magnaride and non magnaride...wondering if it meant just the GT350. Sorry guys new to the S550 and not sure of the spring diameter.

GT350 only, IIRC the rear knuckles are different on a 350 vs S550

 

[Dave2013M3]

Th

GT350 only, IIRC the rear knuckles are different on a 350 vs S550

Thanks

 

[NightmareMoon]

GT350 and all magnaride cars (of both types) have one rear spring that is wound the opposite direction from the other S550 cars and its the lower rear control arm that the spring sits in.

If you get two of the correct rear spring part (I forget which aide it is) then you could run these or other magnaride springs on an S550.

 

[Dave2013M3]

GT350 and all magnaride cars (of both types) have one rear spring that is wound the opposite direction from the other S550 cars and its the lower rear control arm that the spring sits in.

If you get two of the correct rear spring part (I forget which aide it is) then you could run these or other magnaride springs on an S550.

Thanks, I mainly just want to lower the car maybe just 20mm. Thats what drew me to these springs. May just end up with the FRPP or Eibach Pro Kit. I like the fact the front is dropped more than the rear even if just by a tad.

Dave

Sponsored