Project 6 Mark II: My second S550 V6 Build

[jperls]

Front view. He used the same mesh in the grille delete kit. Dremeled and cut out the backside of the plastic area leaving the contour piece and add the mesh.

Yep...just found my next mod....this is going to be great and a lot cheaper than the 777 performance GT500 front bumper clip (http://www.777performance.com/product/2015-2017-mustang-projectse7en-fascia/)

Sponsored

 

[USMCtoARMY]

You can get the GT500 style front side diffusers too for the stock bumper. Would look dope.

 

[USMCtoARMY]

https://zl1addons.com/products/mustang-15-19-gt500-style-splitter-winglet-fender-extensions

 

[jperls]

https://zl1addons.com/products/mustang-15-19-gt500-style-splitter-winglet-fender-extensions

Thanks for the suggestion...but I was mainly looking at a way to get rid of the fog lights...now I know what I am going to do...

 

[Stam616]

Haven't updated in awhile but just installed a DCTMS steering wheel with grey stitching! Purchased from a fellow M6G member.

Love the wheel! I’d want red stitching or black now because I’ll be putting in a saddle type leather interior. Zack, I haven’t been on here as much but I’ll be continuing to follow your build. I’m going to try to get more done with mine so I’ll look be on here more. I’d love to do the Sync 3 upgrade as well. How much was that and how hard was it to install? I have company that can make your emblem. They made my custom emblem . They’re not cheap but excellent OEM quality. Finally installing it and the 18 decklid at some point over the next week . Here’s a pic.

 

[zackmd1]

I’d love to do the Sync 3 upgrade as well. How much was that and how hard was it to install?

It is not difficult at all! You can get it done for around $500-600 if you are crafty with where you get your parts. You can find complete screen assemblies on ebay for around $300 and radio bezels for around $200. Carplay usb hubs can be found for around $50. If you are ok with doing your own wiring then that is free or about $150 for a plug and play harness. More info can be found here!

https://www.mustang6g.com/forums/threads/sync-3-swap-its-all-in-here.82973/

 

[Stam616]

It is not difficult at all! You can get it done for around $500-600 if you are crafty with where you get your parts. You can find complete screen assemblies on ebay for around $300 and radio bezels for around $200. Carplay usb hubs can be found for around $50. If you are ok with doing your own wiring then that is free or about $150 for a plug and play harness. More info can be found here!

https://www.mustang6g.com/forums/threads/sync-3-swap-its-all-in-here.82973/

Thanks for the info. I couldn’t do the wiring that I could tell you. I’d need someone who knows what they are doing to do it right .

Sponsored