GT350R - Aftermerket Wheel Lug Nut Solution

[morjo02]

Definitely interested. PM sent.

do you have a side by side comparison of the long versus short TI Lug Nuts and also on a wheel ?

what is the final recommendation for the torque lbs for the TI Lug Nuts on the GT350R carbon fibre wheels. I believe the factory recommendation is 150LBs of torque for dry application with the OEM steel bolts and nuts. I would not take a chance unless there is a recommendation and confirmation by an expert.

Sponsored

 

[50 Deep]

do you have a side by side comparison of the long versus short TI Lug Nuts and also on a wheel ?

what is the final recommendation for the torque lbs for the TI Lug Nuts on the GT350R carbon fibre wheels. I believe the factory recommendation is 150LBs of torque for dry application with the OEM steel bolts and nuts. I would not take a chance unless there is a recommendation and confirmation by an expert.

No recommendation has been provided other than what has been working. To date there are over 100 sets being used on the street and track without issue. Most enthusiasts using them are at 125-135 ft/lbs. And they work on the F150 Raptor as well.

I actually haven't done in side by side photos on a wheel since they are specific lengths for the front and rear. This ensures they protrude the same amount front to back. There wouldn't be a situation where you needed to interchange them, but some more installed photos are below.

Titanium lug nuts have been in use for decades from many other manufacturers across many other makes/models of cars. I wouldn't call it taking a chance, but it all depends on your personal comfort level.

The anti-seize is only needed to prevent galling. You may want to consider a Zinc based anti-seize as it should not affect the torque values. Check out the link below.

https://www.kraftindustrialsupply.com/MSDSTDS/39901TDS.pdf

 

[rick shea]

No recommendation has been provided other than what has been working. To date there are over 100 sets being used on the street and track without issue. Most enthusiasts using them are at 125-135 ft/lbs. And they work on the F150 Raptor as well.

I actually haven't done in side by side photos on a wheel since they are specific lengths for the front and rear. This ensures they protrude the same amount front to back. There wouldn't be a situation where you needed to interchange them, but some more installed photos are below.

Titanium lug nuts have been in use for decades from many other manufacturers across many other makes/models of cars. I wouldn't call it taking a chance, but it all depends on your personal comfort level.

The anti-seize is only needed to prevent galling. You may want to consider a Zinc based anti-seize as it should not affect the torque values. Check out the link below.

https://www.kraftindustrialsupply.com/MSDSTDS/39901TDS.pdf

What is the cost and product code for the Ti lug nuts for the 2019 GT 350R OEM carbon fiber wheels?

 

[50 Deep]

What is the cost and product code for the Ti lug nuts for the 2019 GT 350R OEM carbon fiber wheels?

Rick,

Cost on these is $400 shipped in the long or short version. I sell them direct, so just send me an email or DM to get an invoice for some. You will want the all short set, and I think I have one more set in stock.

 

[galaxy]

We. Want. 12. Point. We. Want. 12. Point.

 

[z28plus]

These work on any aftermarket wheel for the 350R?

 

[50 Deep]

Gents,

The next set of Ti lug nuts is in production now with a 45-60 day lead time. I am doing a run of 30 sets, with 18 sets spoken for already.

Please send me a DM if you want to get in on this batch. The next set will likely be built sometime in the fall.​

 

[50 Deep]

We. Want. 12. Point. We. Want. 12. Point.

Get that CAD work done for me and I can see about it :-)

These work on any aftermarket wheel for the 350R?

Unfortunately not all wheels are created equal. The only fitment I can guarantee is with the Signature Wheel. I have seen them physically work with other brands, but the fitment is not always optimal. Best bet is to let me know what you have, and I can talk you through it.

 

[galaxy]

I’m not speaking for T and his company, but just to add that they do workin ideally and perfectly with the Vibe Motorsport R replica wheels (on a non R car).

I have the first set of Vibe wheels made for a non R car and this was being done about the time T was selling these lugs. So I worked with Vibe on my order with the lug dimensions to ensure they would be built around them.

 

[50 Deep]

Hey everyone. Quick update.

The May batch of titanium lug nuts is arriving to me today. I will have them packed up and shipped back out to all those waiting Thursday and Friday via USPS.

The next batch is on target for the end of July completion. I have about 15 sets left available. Added in a few all short sets for those with stock carbon wheels, or running square rotatable track setups.

cheers!

 

[zsommer79]

Hey everyone. Quick update.

The May batch of titanium lug nuts is arriving to me today. I will have them packed up and shipped back out to all those waiting Thursday and Friday via USPS.

The next batch is on target for the end of July completion. I have about 15 sets left available. Added in a few all short sets for those with stock carbon wheels, or running square rotatable track setups.

cheers!

Need half a short set if possible.

 

[rick shea]

[iQUOTE="zsommer79, post: 2924872, member: 46755"]Need half a short set if possible.[/QUOTE]

I have a 2019 GT350R. What would the appropriate size lugs cost for my stock carbon fiber wheels? you can PM me with a price delivered.

 

[50 Deep]

Need half a short set if possible.

Only 10 might be difficult, but let me see what I can do. Might have some lightly used ones available soon.

I have a 2019 GT350R. What would the appropriate size lugs cost for my stock carbon fiber wheels? you can PM me with a price delivered.

you would want the all short version. The cost would be $430 shipped to your door.

 

[50 Deep]

Feels like I just shipped a bunch of cocaine, considering how dope these all are....

 

[DrumReaper]

Feels like I just shipped a bunch of cocaine, considering how dope these all are....

And they look freshly laundered;)

Sponsored