Rohana Wheels RF | RC Series Light Weight & Max Concave Design | Team VIBE

[shadowx]

20x9+22 | 20x11+48

what offset should i put if my wheel is 20x10? or i can put the same +22?

Sponsored

 

[VibeMotorsports]

what offset should i put if my wheel is 20x10? or i can put the same +22?

depends on the company of wheels you are looking to get, some do offer 20x10 to work and some dont.
Rohana has the 20x10+22 20x11+48, the +22 is a slight aggressive in the front on the 20x10.

 

[shadowx]

depends on the company of wheels you are looking to get, some do offer 20x10 to work and some dont.
Rohana has the 20x10+22 20x11+48, the +22 is a slight aggressive in the front on the 20x10.

yes it's the same as the pic Rohana rfx5. my car is without pp

 

[VibeMotorsports]

Thank you guys for the support with the orders, PM, Email or Call me for discounts. .

Discount range from $100-$500 depending on the brand but i got you covered.

Office 800-814-8423 x104 | Cell 323-201-1777 (txt or call)

[email protected]

​

 

[shadowx]

depends on the company of wheels you are looking to get, some do offer 20x10 to work and some dont.
Rohana has the 20x10+22 20x11+48, the +22 is a slight aggressive in the front on the 20x10.

I have gt19 without pp and im getting rohana rfx 20x10 f and 20x11 r. but dont know which offsets to get.
how does it look if i get +22 front and +28 rear? and is there any rubbing?
what about +40 f and +48 r ? which one is the best without problems?

 

[VibeMotorsports]

I have gt19 without pp and im getting rohana rfx 20x10 f and 20x11 r. but dont know which offsets to get.
how does it look if i get +22 front and +28 rear? and is there any rubbing?
what about +40 f and +48 r ? which one is the best without problems?

Here are the fitments:

20x10+40 20x11+50 will need a 3/5mm spacer in the front to clear the grease cap and to use center caps

20x10+22 20x11+28 is to low of an offset that it will poke pass the fender both front and rear.

I have seen some use a 20x10+22 and 20x11+50 but the front needed some adjustment to work properly.

 

[shadowx]

Here are the fitments:

20x10+40 20x11+50 will need a 3/5mm spacer in the front to clear the grease cap and to use center caps

20x10+22 20x11+28 is to low of an offset that it will poke pass the fender both front and rear.

I have seen some use a 20x10+22 and 20x11+50 but the front needed some adjustment to work properly.

so what are the best offsets I have to choose between ( from what to what ) for both front and rear for this car without adjustment? what did you mean by adjustment?

 

[shadowx]

Here are the fitments:

20x10+40 20x11+50 will need a 3/5mm spacer in the front to clear the grease cap and to use center caps

20x10+22 20x11+28 is to low of an offset that it will poke pass the fender both front and rear.

I have seen some use a 20x10+22 and 20x11+50 but the front needed some adjustment to work properly.

is it a problem if it will poke pass fenders? do I need adjustment? or it just looks aggressive?

 

[VibeMotorsports]

so what are the best offsets I have to choose between ( from what to what ) for both front and rear for this car without adjustment? what did you mean by adjustment?

20x10+40 20x11+50 would be the fitment with a 3/5mm spacer on the RFX11 with camber adjustment needed.

If you want to avoid spacer you can use the 20x10+22 front but you will need adjust more of the camber to work

email me brother: [email protected]

Jake

Sponsored