Min Ahn
Well-Known Member
- Joined
- May 5, 2019
- Threads
- 30
- Messages
- 150
- Reaction score
- 68
- Location
- Denver, CO
- First Name
- Min
- Vehicle(s)
- 2019 Mustang Ecoboost Premium
- Thread starter
- #1
I stripped one of the open ended acorn nuts of Steeda 20mm hubcentric spacer, but I can't find a replacement for it.
According to the spec, the nut should be 13/16 Hex head, M14 x 1.50mm.
These are the closest ones that I could find but as you can see it's taller than the Steeda nuts.
(They're 0.81" whereas the Steeda nuts are 0.6")
I think the wheel won't sit flush on the spacers if the nuts are this tall..
Would it be possible to get some help on this?
Thanks in advance.
According to the spec, the nut should be 13/16 Hex head, M14 x 1.50mm.
These are the closest ones that I could find but as you can see it's taller than the Steeda nuts.
(They're 0.81" whereas the Steeda nuts are 0.6")
I think the wheel won't sit flush on the spacers if the nuts are this tall..
Would it be possible to get some help on this?
Thanks in advance.
Sponsored