the5
Well-Known Member
- Joined
- May 26, 2015
- Threads
- 21
- Messages
- 128
- Reaction score
- 88
- Location
- United States
- Vehicle(s)
- 2013 GT
Getting Pictures Today!
Sponsored
Sponsored
Tow Hooks - GT500 Have Them
- Thread starter Houston Kid
- Start date
- Watchers 11
fastergt350
Well-Known Member
- Joined
- Mar 9, 2017
- Threads
- 8
- Messages
- 196
- Reaction score
- 660
- Location
- Akron,New York
- First Name
- Chris
- Vehicle(s)
- 2021 Mach 1 HP, 2022 Ranger Lariat Tremor
Sounds like a plan.
Jmeo
You said member ;)
- Joined
- May 28, 2014
- Threads
- 250
- Messages
- 8,568
- Reaction score
- 9,076
- Location
- Massachusetts
- First Name
- Jaime
- Vehicle(s)
- 2020 GT500, 2022 F150 PowerBoost
- Vehicle Showcase
- 2
Outstanding
taylor.crandall1
Well-Known Member
Does anybody have or know the part number for the GT500 bumper beam?
OP
OP
Houston Kid
Well-Known Member
- Joined
- Mar 8, 2017
- Threads
- 167
- Messages
- 3,112
- Reaction score
- 2,245
- Location
- Houston, TX
- Vehicle(s)
- '22 GT500 HE CFTP, '18 WK2 ,'16 Audi A7
- Thread starter
- #20
I see the gears turning.
Sponsored
Epiphany
Well-Known Member
It is likely the same beam used on the 2020 GT350 as well. Both use an extruded bumper beam, unlike the rest of the Mustang lineup, which uses a steel beam. I doubt they'd have a separate part number for GT350's now and likely use the same part but it just isn't uncovered or used on that car.
taylor.crandall1
Well-Known Member
fastergt350
Well-Known Member
- Joined
- Mar 9, 2017
- Threads
- 8
- Messages
- 196
- Reaction score
- 660
- Location
- Akron,New York
- First Name
- Chris
- Vehicle(s)
- 2021 Mach 1 HP, 2022 Ranger Lariat Tremor
Where did everyone go, did this subject up & die?
The Chairman
Well-Known Member
It’s left hand thread. The smaller part of the shaft (unthreaded) is 1/2” diameter
the threaded section is 1” long and has 7 threads. the threaded section is 3/4” diameter.
hope this helps.
Epiphany
Well-Known Member
Can't speak to the depth of each and how that would impact the length of certain hardware but as mentioned earlier, the Focus RS has the same thread and a similar opening.
Sponsored
fastergt350
Well-Known Member
- Joined
- Mar 9, 2017
- Threads
- 8
- Messages
- 196
- Reaction score
- 660
- Location
- Akron,New York
- First Name
- Chris
- Vehicle(s)
- 2021 Mach 1 HP, 2022 Ranger Lariat Tremor
Here is the Info. that I got from Noah.It’s left hand thread. The smaller part of the shaft (unthreaded) is 1/2” diameter
the threaded section is 1” long and has 7 threads. the threaded section is 3/4” diameter.
hope this helps.
the5
Well-Known Member
- Joined
- May 26, 2015
- Threads
- 21
- Messages
- 128
- Reaction score
- 88
- Location
- United States
- Vehicle(s)
- 2013 GT
Soon 
Sadly been Busy with a couple other things
Sadly been Busy with a couple other things
fastergt350
Well-Known Member
- Joined
- Mar 9, 2017
- Threads
- 8
- Messages
- 196
- Reaction score
- 660
- Location
- Akron,New York
- First Name
- Chris
- Vehicle(s)
- 2021 Mach 1 HP, 2022 Ranger Lariat Tremor
Well we all have things to take care of, hope it is all ok. The picture of the plate placement looks great. Will wait for the next step. ChrisSoon
Sadly been Busy with a couple other things
The Chairman
Well-Known Member
Is that the Gimmspeed Bracket? (Looks like it)Soon
Sadly been Busy with a couple other things
Wanted someone else to spend the $80+ to test fit it before I jumped in...
fastergt350
Well-Known Member
- Joined
- Mar 9, 2017
- Threads
- 8
- Messages
- 196
- Reaction score
- 660
- Location
- Akron,New York
- First Name
- Chris
- Vehicle(s)
- 2021 Mach 1 HP, 2022 Ranger Lariat Tremor
I spoke with Grimm Speed Cust. Rep. yesterday about the Relocation Plate Bracket and they said that they did NOT have a compatible part that would fit the Mustang Set-Up. So whats up?
Sponsored