2019 GT-350 Spoiler

[SoCalTim]

Patiently waiting for an aftermarket option that has the provision for the additional gurney flap.

Anderson composites want $1000 for their carbon version of the spoiler, and $600 for the carbon wickerbill. Too rich for me at $1600 for the complete 2 piece wing.

Sponsored

 

[eduranjr]

Just wanted to update on my spoiler. I ordered from the link that @eduranjr got his from I believe. Been on order since November 11th, and just received tracking on it yesterday. Hopefully it survives shipping...

Good luck mate! Xmas season is always a PIA ordering from anywhere!

 

[BDMACH1]

Good luck mate! Xmas season is always a PIA ordering from anywhere!

Thanks @eduranjr ....It just showed up! she's a little damaged, but nothing we can't repair here at the shop! The quality looks very nice, but the packaging didn't fair so well....lol

 

[BlownGP]

PICS!!!!!!!!!!!!!

 

[2morrow]

Patiently waiting for an aftermarket option that has the provision for the additional gurney flap.

Anderson composites want $1000 for their carbon version of the spoiler, and $600 for the carbon wickerbill. Too rich for me at $1600 for the complete 2 piece wing.

I hear you man. I talked to them today and no wiggle room there.

On a slightly separate note:
- I reached back out to Carbon Dynamics (I know I know...) and they're unresponsive. No Surprise there.
- I'm getting tired of waiting for the Spec S550 Wing from APR.

F it, I'm just not going to run more rear aero this season...

In my frustration I pulled the trigger on a Sparco Carbon Fiber racing seat, Sparco Harnesses, seat brackets, mounting plate and hardware

 

[BlownGP]

Sooooo, I bought this
https://www.ebay.com/itm/Glossy-Bla...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

For $159 it was a steal. It came in today and looks great.

My only question. Want can I use to put around the screw holes so that water doesn't get into them?

 

[2morrow]

Sooooo, I bought this
https://www.ebay.com/itm/Glossy-Black-GT500-GT350-Style-Trunk-Spoiler-Wing-For-S550-15-2020-Ford-Mustang/193281312696?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

For $159 it was a steal. It came in today and looks great.

My only question. Want can I use to put around the screw holes so that water doesn't get into them?

great deal!

I would use some simple rubber grommets or small radii rubber seals. you might be able to find them at a local hardware store.

 

[ModularKid21]

Sooooo, I bought this
https://www.ebay.com/itm/Glossy-Black-GT500-GT350-Style-Trunk-Spoiler-Wing-For-S550-15-2020-Ford-Mustang/193281312696?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

For $159 it was a steal. It came in today and looks great.

My only question. Want can I use to put around the screw holes so that water doesn't get into them?

The one @SoCalTim got had double sided tape on the bottom already. I believe he replaced it with some thinner tape for aesthetic reasons. Link to the thread below if you haven’t already seen it

https://www.mustang6g.com/forums/threads/gt350-gt500-2019-spoiler-ebay-150-pre-painted.134086/

 

[Xtian_Av]

Sooooo, I bought this
https://www.ebay.com/itm/Glossy-Black-GT500-GT350-Style-Trunk-Spoiler-Wing-For-S550-15-2020-Ford-Mustang/193281312696?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

So you had to drill new holes into the trunk to install this spoiler since it didnt use the OEM spoiler holes?

 

[BlownGP]

It came with double sided tape that was the size of each pedestal and with holes for the bolt holes.

There are three bolt holes on each side of the pedestal and two in the middle. You can only use one one on each side unless you want to drill holes through the trunk.. NO THANKS. lol

I'm pretty sure it's not going anywhere with one bolt on each side. Two in the middle and the double sided tape.

 

[Dmich316]

It came with double sided tape that was the size of each pedestal and with holes for the bolt holes.

There are three bolt holes on each side of the pedestal and two in the middle. You can only use one one on each side unless you want to drill holes through the trunk.. NO THANKS. lol

I'm pretty sure it's not going anywhere with one bolt on each side. Two in the middle and the double sided tape.

Hows the wing holding up so far? You was able to use 1 hole on each side and 2 in the middle without drilling?

 

[BlownGP]

Hows the wing holding up so far? You was able to use 1 hole on each side and 2 in the middle without drilling?

Yeah, One hole on each side and two in the middle. No drilling unless you want to get the other two on each side which I really don't think you need.

Took some pics this weekend since we finally had some nice weather.

 

[Dmich316]

Yeah, One hole on each side and two in the middle. No drilling unless you want to get the other two on each side which I really don't think you need.

Took some pics this weekend since we finally had some nice weather.

Damn that looks good bro! Was about to order one for $500 but that one looks just as good if not the same. About to pull the trigger on that one you have.

 

[BlownGP]

Damn that looks good bro! Was about to order one for $500 but that one looks just as good if not the same. About to pull the trigger on that one you have.

Thanks buddy.

Yeah, you can't beat it for the price. I was shocked to see it that cheap.

 

[Xtian_Av]

Yeah, One hole on each side and two in the middle. No drilling unless you want to get the other two on each side which I really don't think you need.

Took some pics this weekend since we finally had some nice weather.

Since it doesn't have the mounting bolts like the OEM Spoilers to screw nuts into the trunk, What size bolts did you use to lock it down?

I'm buying this spoiler now so just wanna have everything ready to install

Sponsored