RPI Designs
Well-Known Member
- Joined
- Nov 18, 2014
- Threads
- 214
- Messages
- 900
- Reaction score
- 64
- Location
- Salem, Ohio
- Website
- www.rpidesigns.com
- Vehicle(s)
- 2015 Mustang GT - Test Mule
- Thread starter
- #1
2015-2019 Ford Mustang Convertible WindRestrictor Logo Wind Screen
https://www.rpidesigns.com/shop/ite...convertible-wind-restrictor-logo-wind-screen/
We've done countless hours of extensive research, development, and testing to bring to high-end roadster owners the best quality, most precisely designed and most awesome looking wind deflecting devices on the market.
Our Wind Restrictor is an amazing, unique and durable product that blocks as much, if not more, wind turbulence than the factory OEM mesh net windscreens and helps to maintain the temperature inside of your roadster when the top is down. All of the Wind Restrictors™ we offer can remain in place with the roof closed and are mounted solid yet inconspicuously without any permanent alterations to your roadster.
*Made from double-sided AR Polycarbonate.
(Very durable acrylic type material is also scratch resistant! Others are made out of much cheaper materials and dangerously breakable plastics. Some may be made out of Lexan; the disadvantage to Lexan is that it scratches easily and won't emit illumination, It may also discolor with etching.)
*Professionally precisely designed and laser cut.
(Others are produced at home using table routers and jigsaws leaving rough edges and defective shapes. Wind Restrictors™ are professionally produced from the finest materials using state-of-the-art equipment.)
*PERFECTLY formed to the contours of your roadster.
(Others are not designed and manufactured to exactly fit the body lines or roll bars on your roadster.)
*Attaches to your roadster without permanent alteration or tacky fixtures.
(No drilling of holes, adhesive tape, Velcro or straps.)
*Extremely smooth crystal-clear edges.
(Others are sometimes sharp and ridged, ours are laser cut smooth to perfection then flame polished so that the Wind Restrictor™ looks and feels like a million bucks as well as emitting illumination to the fullest.)
*Installation easy as 1,2,3!
(1.- Remove 2-4 screws from your rear panel; 2.- Mount the Wind Restrictor™ into place; 3.- Put extended screw connectors back in place! takes about 5-8 minutes.)
Fitment: 2015, 2016, 2017, 2018, 2019 Mustang
https://www.rpidesigns.com/shop/ite...convertible-wind-restrictor-logo-wind-screen/
We've done countless hours of extensive research, development, and testing to bring to high-end roadster owners the best quality, most precisely designed and most awesome looking wind deflecting devices on the market.
Our Wind Restrictor is an amazing, unique and durable product that blocks as much, if not more, wind turbulence than the factory OEM mesh net windscreens and helps to maintain the temperature inside of your roadster when the top is down. All of the Wind Restrictors™ we offer can remain in place with the roof closed and are mounted solid yet inconspicuously without any permanent alterations to your roadster.
*Made from double-sided AR Polycarbonate.
(Very durable acrylic type material is also scratch resistant! Others are made out of much cheaper materials and dangerously breakable plastics. Some may be made out of Lexan; the disadvantage to Lexan is that it scratches easily and won't emit illumination, It may also discolor with etching.)
*Professionally precisely designed and laser cut.
(Others are produced at home using table routers and jigsaws leaving rough edges and defective shapes. Wind Restrictors™ are professionally produced from the finest materials using state-of-the-art equipment.)
*PERFECTLY formed to the contours of your roadster.
(Others are not designed and manufactured to exactly fit the body lines or roll bars on your roadster.)
*Attaches to your roadster without permanent alteration or tacky fixtures.
(No drilling of holes, adhesive tape, Velcro or straps.)
*Extremely smooth crystal-clear edges.
(Others are sometimes sharp and ridged, ours are laser cut smooth to perfection then flame polished so that the Wind Restrictor™ looks and feels like a million bucks as well as emitting illumination to the fullest.)
*Installation easy as 1,2,3!
(1.- Remove 2-4 screws from your rear panel; 2.- Mount the Wind Restrictor™ into place; 3.- Put extended screw connectors back in place! takes about 5-8 minutes.)
- Product Highlights:
- 1: Product will not interfere with various roll bars.
- 2: Can be left in place with the top up.
- 3: Does not block off rear seating area.
- 4: Allows for full seat travel on both sides.
- 5: Transparent material that will not block rear vision like black nets.
- 6: Front seat mount that blocks over 75% of wind turbulence.
Fitment: 2015, 2016, 2017, 2018, 2019 Mustang
Sponsored
