Sponsored

11 Inch wide wheels that fit stock?

The Chairman

Well-Known Member
Joined
Mar 18, 2016
Threads
16
Messages
1,581
Reaction score
1,432
Location
South TX
Vehicle(s)
‘09 GT500KR & ‘16 GT350 Track Pack & ‘20 GT500 HP
BTW: Some hub-centric spacers won’t seat flush over the hub. So I also use a 5mm spacer from ZL1 Addons that has a bigger hole for the hub center, then the 1” spacer. This also ensures the wheel/tires won’t hit the shock if running a lot of camber.
Sponsored

 

saleen367

Well-Known Member
Joined
Aug 9, 2015
Threads
14
Messages
535
Reaction score
419
Location
MN
First Name
Jeff
Vehicle(s)
2022 Mach 1 HP N3451 2015 Focus
I highly recommend going to a true square set up (front and rear rims & tires are identical). All you have to do is change the front hubs using this Moog part #513405. It’s a simple 4 bolt remove & replace. Changing the studs alone is too much trouble (I tried and messed up the hubs, and those ARP studs are expensive!).
You will note when you get the Moog part it has a Ford Part number on it, so they may be the supplier for Ford.
I use the Apex wheels 19x11” square set up for true rotating capability. I use 305-30x19 SC2 tires.
https://www.apexraceparts.com/wheels/ec-7-wheels/19x11-et52-apex-ec-7-mustang-wheel.html
@The Chairman, is this Moog PN compatible with a PP2? Pretty sure the PP2 shares the GT350 hub assembly.
 

The Chairman

Well-Known Member
Joined
Mar 18, 2016
Threads
16
Messages
1,581
Reaction score
1,432
Location
South TX
Vehicle(s)
‘09 GT500KR & ‘16 GT350 Track Pack & ‘20 GT500 HP
I would only be guessing, but I would presume so.
If the stock hub part number is the same for both the GT350 and the PP2, then yes for sure.
 

Sponsored

 




Top