Steeda S550 Ultralite 2-Point G-Trac Brace - Now Available!

[David@Steeda]

The Steeda Ultralite 2-Point G-Trac Brace fits every model mustang from 2015-2016+ and up (GT, GT350, V6, EcoBoost) and was designed to complement the famed GT350’s suspension, while allowing the most versatility in aftermarket fitments - our brace even allows fitment for long tube headers without affecting ground clearance! This brace adds stiffness to your vehicle's front subframe in both bending and torsion, greatly reducing your wheels' suspension compliance.

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95

Steeda’s S550 Ultralight 2-Point G-Trac Brace is the lightweight stiffness champion. Pound for pound this brace adds more stiffness to your chassis front subframe than any other unit on the market - our brace weighs in at a mere 5.5 lbs!

Key Benefits:

- Improves chassis stiffness and suspension compliance
- Weighs in at a mere 5.5 lbs.
- Extremely compatible with other aftermarket components (headers, etc.)
- Improves vehicle response and predictability
- Installs in minutes
- Made in the USA, lifetime warranty

Please note, this cannot be used in conjunction with our S550 Extreme G-Trac Brace.

Give yourself the competitive advantage with a more responsive turn in, faster lap times, and a more predictable handling experience with Steeda's S550 Ultralight 2-Point G-Trac Brace for your 2015-2016+ GT, GT350, V6 or EcoBoost today!

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95

Sponsored

 

[Ruby15GT]

Do you have installation pics and instructions?

 

[David@Steeda]

Do you have installation pics and instructions?

Yes, should have that shortly! :cheers:

 

[Dylan_S550]

Is this almost like a revision of the G Trac brace? Same function as the original brace?

 

[David@Steeda]

Is this almost like a revision of the G Trac brace? Same function as the original brace?

Very similar function, we are appealing to the customers who are wanting an increase in chassis stiffness without worrying about clearance issues. We will continue to produce both g-trac braces

 

[T-S550-X]

@David@Steeda,

What clearance issues are you referring to specifically? Like ground clearance?

 

[David@Steeda]

@David@Steeda,

What clearance issues are you referring to specifically? Like ground clearance?

Yes, ground clearance and header clearance.

 

[Dylan_S550]

Very similar function, we are appealing to the customers who are wanting an increase in chassis stiffness without worrying about clearance issues. We will continue to produce both g-trac braces

Is there a substantial difference between the K brace and this new brace in regards to chassis stiffness? Since the K brace has 4 points, and this having two I'd think this would be less stiff correct?

 

[dsp4848]

Is there a substantial difference between the K brace and this new brace in regards to chassis stiffness? Since the K brace has 4 points, and this having two I'd think this would be less stiff correct?

I'd be interested to know this as well

 

[GagneGo]

Bump

 

[David@Steeda]

When comparing the relative stiffness of the front K-member, it is important to note load paths and bolt locations. The newly designed 2-Point G-Trac Brace provides support for the chassis loads to transfer directly to the mounting bolts, no offset stamped steel brackets in bending here. Our product's load paths along with larger diameter steel extrusions allow it to maintain up to 80% of the more complex Extreme G-Trac K-member Brace strength and stiffness at a fraction of the cost and weight.

 

[SteedaTech]

The Steeda Ultralite 2-Point G-Trac Brace fits every model mustang from 2015-2016+ and up (GT, GT350, V6, EcoBoost) and was designed to complement the famed GT350’s suspension, while allowing the most versatility in aftermarket fitments - our brace even allows fitment for long tube headers without affecting ground clearance! This brace adds stiffness to your vehicle's front subframe in both bending and torsion, greatly reducing your wheels' suspension compliance.

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95

Steeda’s S550 Ultralight 2-Point G-Trac Brace is the lightweight stiffness champion. Pound for pound this brace adds more stiffness to your chassis front subframe than any other unit on the market - our brace weighs in at a mere 5.5 lbs!

Key Benefits:

- Improves chassis stiffness and suspension compliance
- Weighs in at a mere 5.5 lbs.
- Extremely compatible with other aftermarket components (headers, etc.)
- Improves vehicle response and predictability
- Installs in minutes
- Made in the USA, lifetime warranty

Please note, this cannot be used in conjunction with our S550 Extreme G-Trac Brace.

Also, check out several online 5 star reviews.

Give yourself the competitive advantage with a more responsive turn in, faster lap times, and a more predictable handling experience with Steeda's S550 Ultralight 2-Point G-Trac Brace for your 2015-2016+ GT, GT350, V6 or EcoBoost today!

Steeda S550 Mustang Ultralite 2-Point G-Trac Brace (15-16 All) | 555-5533: $79.95

 

[OniVita]

Will it clear Kooks green cats headers in 2016 Mustang GT?

 

[SteedaTech]

Will it clear Kooks green cats headers in 2016 Mustang GT?

Yes.

 

[OniVita]

Yes.

Just placed my order thanks a lot

Sponsored