300blackout
Well-Known Member
- Thread starter
- #1
Brand new never installed Caliperfexion Stainless front brake caliper studs and Extension kit.
Per Caliperfexion website:
"
Replace your one-time use factory front brake caliper bolts with much superior, stainless studs. Threads on both ends are rolled for exceptional strength and smoothness. Kit includes four studs, four 12 point stainless ARP 1/2" x 20tpi nuts, four hardened ARP washers, two jam nuts (for installation only), thread locker for the knuckle end of the stud, ARP thread lubricant for the nut end (optional but highly recommended use), and complete instructions.
Fits 2015-2019 Shelby GT350 front calipers only. Does not fit other Mustang models. "
Caliper Stud Extensions:
"Caliperfexion stud extensions allow for much easier front brake service when used with our caliper studs (our studs must be installed in order to use these). They thread onto the end of the studs and allow you to simply slide the caliper off to the side, fully supported, in order to access brake components. Kit consists of 1 pair to allow supporting one caliper at a time. Sleeves come with a threaded plug installed into each end to protect the threads. It is suggested you reinstall the plug after use in order to protect them from damage when stored in a toolbox, etc.
The sleeves are constructed with a 303 stainless tube and a 6061-T6 anodized knob. They are manufactured for us by our good friends at MGW Shifters and the quality is superb."
$170 shipped in the Continental US. Paypal please add 3% paypal fee. Thank you
Per Caliperfexion website:
"
Replace your one-time use factory front brake caliper bolts with much superior, stainless studs. Threads on both ends are rolled for exceptional strength and smoothness. Kit includes four studs, four 12 point stainless ARP 1/2" x 20tpi nuts, four hardened ARP washers, two jam nuts (for installation only), thread locker for the knuckle end of the stud, ARP thread lubricant for the nut end (optional but highly recommended use), and complete instructions.
Fits 2015-2019 Shelby GT350 front calipers only. Does not fit other Mustang models. "
Caliper Stud Extensions:
"Caliperfexion stud extensions allow for much easier front brake service when used with our caliper studs (our studs must be installed in order to use these). They thread onto the end of the studs and allow you to simply slide the caliper off to the side, fully supported, in order to access brake components. Kit consists of 1 pair to allow supporting one caliper at a time. Sleeves come with a threaded plug installed into each end to protect the threads. It is suggested you reinstall the plug after use in order to protect them from damage when stored in a toolbox, etc.
The sleeves are constructed with a 303 stainless tube and a 6061-T6 anodized knob. They are manufactured for us by our good friends at MGW Shifters and the quality is superb."
$170 shipped in the Continental US. Paypal please add 3% paypal fee. Thank you
Sponsored