GT350 Valance

[BDMACH1]

hey buddy I have Borla as well, which tips did you weld to the mufflers to make it work? I like the sound of my Borla catback and do not want to drop more $ on just mufflers especially after picking up this bumper and valance for $1,000... Having troubles figuring it myself so much appreciated!

Hey Jacob!

I ordered these with a 3" inlet for the muffler side...
https://www.stangmods.com/Mustang-Quad-4-Inch-Exhaust-Tips-p/3040.htm

Sponsored

 

[GEBRONI]

Hey Jacob!

I ordered these with a 3" inlet for the muffler side...
https://www.stangmods.com/Mustang-Quad-4-Inch-Exhaust-Tips-p/3040.htm

Thank you sir!

 

[BDMACH1]

Thank you sir!

You're welcome, glad I could help!

 

[Boston23]

Hey Jacob!

I ordered these with a 3" inlet for the muffler side...
https://www.stangmods.com/Mustang-Quad-4-Inch-Exhaust-Tips-p/3040.htm

Please post up pics of your project. I want to keep my Roush axle backs and have someone working on a y pipe to utilize the OEM 350 trim tips but this could be an option. Thanks

 

[GEBRONI]

Please post up pics of your project. I want to keep my Roush axle backs and have someone working on a y pipe to utilize the OEM 350 trim tips but this could be an option. Thanks

For now going to rock the stock tips. Purchased a tail pipe cutter to clamps these on while I install the bumper. Bumper should be here next Wednesday. https://www.summitracing.com/parts/aph-ay250/

 

[GEBRONI]

For now going to rock the stock tips. Purchased a tail pipe cutter to clamps these on while I install the bumper. Bumper should be here next Wednesday. https://www.summitracing.com/parts/aph-ay250/

Well I received the GT350 bumper and valance unit from UPS freight today and the bumper is damaged but the valance is good. DIRTY DARN!

 

[My 1st GT]

Wh

I ordered the OEM valance from Levittown Ford for $725 shipped. I will be having my Roush axlebacks fabbed into a Y exit to work.

What size exhaust tips are you using? 4" or 4.5"?

 

[GEBRONI]

Wh

What size exhaust tips are you using? 4" or 4.5"?

After 2 months finally got my refund from damaged shipping claim! Project done ;-)

 

[GEBRONI]

After 2 months finally got my refund from damaged shipping claim! Project done ;-)

I used 4" tips. From eBay https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/262535959579. they needed to be cut about 2 inches off the mounting pipe then welded on. I have Borla catback.

 

[GEBRONI]

I used 4" tips. From eBay https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/262535959579. they needed to be cut about 2 inches off the mounting pipe then welded on. I have Borla catback.

Not sure if you can do 4.5"... 4" is very close to the plastic valance molding... I would fear of it melting it with 4.5" besides the fact they have to be perfectly positioned!

 

[GEBRONI]

before and after View attachment 428705 View attachment 428706 View attachment 428708

Sponsored