What did you do to your GT350 today?

[dpAtlanta]

I have the Recaro seats. I find them to be very comfortable. Note that I’m not a big guy. I’m 5’ 9” and 150lbs. I would even be okay with a tad heavier bolstering actually.

Gain 10 pounds and they'll be perfect... I'm 5' 9" and 160 lbs & they fit like a glove. I do love these seats!!!

Sponsored

 

[Nfs1000f]

I have the Recaro seats. I find them to be very comfortable. Note that I’m not a big guy. I’m 5’ 9” and 150lbs. I would even be okay with a tad heavier bolstering actually.

I have Recaro seats as well. I’m 6’ 1” 200 lbs and find them very comfortable for extended drives.

 

[Les]

Reached 1000 miles this week! Put 200 miles on it in one day! What a great day except for the break dust! 6 hours of driving, 3 hours of cleaning. I enjoyed both, driving and cleaning!

 

[RJay]

Gain 10 pounds and they'll be perfect... I'm 5' 9" and 160 lbs & they fit like a glove. I do love these seats!!!

I'm 6'4" and 240 lbs - figure I would be actually sitting on the side bolsters with an air gap under my azz!

 

[svassh]

I'm 6'4" and 240 lbs - figure I would be actually sitting on the side bolsters with an air gap under my azz!

I'm 6'2 and 230 and fit nice and tight just remove the fat wallet and you'll fit fine

 

[Ninjak]

I'm 6'2 and 230 and fit nice and tight just remove the fat wallet and you'll fit fine

Well since were posting......6'4 290. I'm in there and comfy. I was a bit surprised when I first sat in them, and I have lost weight since that day.

 

[svassh]

Well since were posting......6'4 290. I'm in there and comfy. I was a bit surprised when I first sat in them, and I have lost weight since that day.

Well full disclosure I do have to slide the seat all the way back to enter and exit comfortably. But that may just be my age.

 

[dpAtlanta]

I have the Recaro seats. I find them to be very comfortable. Note that I’m not a big guy. I’m 5’ 9” and 150lbs. I would even be okay with a tad heavier bolstering actually.

I'm 6'2 and 230 and fit nice and tight just remove the fat wallet and you'll fit fine

Alright enthusiastic9, looks like we have a fix that has been partially tested and verified. First, you will need to go to the bank and get a lot of 1 dollar bills. Second, you will need to get a second wallet, Lastly, fill the wallets up until you fit snugly.
You may get some funny looks next time you are paying for something in cash and you have two wallets with 50-60 singles in each one. I thought about that however, tell the female cashier behind the counter that you went back to working at the Chippendales club.

 

[Voodoo Velocity]

Well I joined the club of Officially Broken In (the car). Crossed 1000 miles yesterday. No oil burned, no mechanical issues. 3 splitter scrapes (bottom side only).

Re: Seats.... I went for the powered seats for my 6'3'' 276# frame. They retract when ignition is off making it easier to enter and exit and requires less open door clearance in the garage. Second, I will ALWAYS have cooling fans on! Last the memory settings are for my spirited drives and more relaxed setting for a highway cruise. I find the grip of the seats exceptional for my size - though they do not look it.

 

[svassh]

Got Xpel PPF installed on the entire front end, mirrors, door cups, door edges and rear qtr panel in front of wheels.

 

[mavisky]

I'm 6'4" and 240 lbs - figure I would be actually sitting on the side bolsters with an air gap under my azz!

Depends on your build. I'm 6' 230lbs and it's a nice firm fit.

 

[5.2 liters of democracy]

Full PPF and ceramic coating. I'm quite pleased with the result.

 

[TDC]

Preparations for next track day continue:

- oil change
- brake fluid flush
- Steeda front camber plates installed - 3 deg front camber (paired with BMR camber bolts)
- safety inspection
Mileage ~16.2k

 

[nordique14]

Preparations for next track day continue:

- oil change
- brake fluid flush
- Steeda front camber plates installed - 3 deg front camber (paired with BMR camber bolts)
- safety inspection
Mileage ~16.2k

Any trick to the brake bleed? Need to do it next week. Looks like just inside caliper and outside caliper. How much fluid should I get?

 

[Niz55]

Make sure to get big plastic bag from home Depot and cover under the hood and the whole front end while you are doing brake bleed. I had the hose fail on me on my other car and brake fluid all over the motor bay and the fenders.

Also, Everytime you pump the bleeder,put a towel over it so if anything goes wrong it doesn't destroy your paint or come in contact with your face or body.

Sponsored