2019 GTPP1 Wheel Widening

[2019BlueGT]

I have a 2019 GT PP1. I love the look of the stock wheels but want to run a 275/35 and 305/30 setup. Can I widen the fronts 1 inch and the rear 1-1.5 inches and make this work? There is a good place semi local to me so I wouldn't have to ship the wheels. That will cut down on the costs of widening. I've searched and didn't see anything about the PP1 wheels. The fronts are 19x9 with a 42 offset and the rears are 19x9.5 with a +52 offset. Thanks in advance!

Sponsored

 

[Cobrakit]

I was going to try and run rear wheels on front and then only get rears widened by Weldcraft. Should work on rear. Raise car and put a 2x4 block between rear tire/rim and car to confirm. Ended up buying new wheels because i wanted to get different color. Widening is not cheap, but if no shipping. Make sure you use a quality shop.

 

[2019BlueGT]

I was worried about the offset being all wrong when swapping the fronts to the back with widening.

 

[Cobrakit]

The 9.5 on front would be about 0.1in further in wheel well. Most here would prefer to run wheels further out toward fender. Offset is confusing, you really want to know where the outside face of the wheel/tire is realitve to the fender.

 

[kona5.0]

Hey guys! I am in the process right now on getting a 325 for my 2019 gt pp1 lol. I have spoke to both the new rim company I'm getting, and others with the new gen 3 mustangs who have ran a 325 and they all have had no problem. the only thing is I see them all on bags, I will not be on bag so hope that helps!!

 

[FruityJudy]

Hey guys! I am in the process right now on getting a 325 for my 2019 gt pp1 lol. I have spoke to both the new rim company I'm getting, and others with the new gen 3 mustangs who have ran a 325 and they all have had no problem. the only thing is I see them all on bags, I will not be on bag so hope that helps!!

325 on factory wheel???

Sponsored