Drewbo
WTF?
The industrial grade Fleshjack makes a reappearance!https://flic.kr/s/aHskHDXT4m here's the link to photos of it all done
Sponsored
The industrial grade Fleshjack makes a reappearance!https://flic.kr/s/aHskHDXT4m here's the link to photos of it all done
Good work but couldn't you have just found two super quiet mufflers and just insert them into your tips for the cold start and then when it warms up just pull them out and put them away until you need them the next morning?I've had a lot of requests for parts/guide etc on this, so I'll post up everything I bought below. It's pretty self explanatory how it all goes together, and there are pics in the album to show it completed.
https://flic.kr/s/aHskHDXT4m here's the link to photos of it all done
This is the step down that I bought https://www.bunnings.com.au/holman-90-x-75-x-65-x-50-x-40mm-storm-pvc-stepped-adaptor_p4760090
And this is the foam plug https://www.bunnings.com.au/icon-plastics-80mm-downpipe-plug_p4779566
This is the rubber adapter I bought (below), but the opening is too big for the tips. You might want to get creative and come up with another solution. Currently I have some foam insulation inside to protect the tip, but I have to butt something heavy up behind the pipe so it doesn't blow off when I start the car, if that makes sense
https://www.bunnings.com.au/deks-industries-100mm-pvc-to-80-90-pvc-rubber-jenco-joiner_p4730879
Before you go to the hardware store, measure the OD of the tip, so you can compare different fittings.
I did also put some foam insulation in there, but can't find on the website. You should find similar at any hardware store.
Hope that all makes sense
Cheers
Matt
How would they stay in there? And I didn't find anything like you are describingGood work but couldn't you have just found two super quiet mufflers and just insert them into your tips for the cold start and then when it warms up just pull them out and put them away until you need them the next morning?
They should stay in there on their own, just a slip fit. I have a 3" resonator and a 3" Reaper hellchamber muffler at home and they slide straight into my AWE 4" tips, I very much doubt they'd blow out on their own.How would they stay in there? And I didn't find anything like you are describing
If they’re more than $40USD, then I prefer my ghetto rig option lol. Gave me something to doThey should stay in there on their own, just a slip fit. I have a 3" resonator and a 3" Reaper hellchamber muffler at home and they slide straight into my AWE 4" tips, I very much doubt they'd blow out on their own.