2019 GT350 Gurney Flap

[Snoopy49]

Does anyone make a replica gurney flap for a 2019 GT350, plastic or carbon fiber?

Sponsored

 

[JCSIX13]

do you have the part number for the spoiler?

 

[Snoopy49]

I think this is the 2019 GT350 / 2020 GT500 Gurney Flap.
Kit - Rear Spoiler - Ford (KR3Z-6344210-AB)

This should be the 2019 GT350 non-R & 2020 GT500 base Rear Spoiler/Wing.
Kit - Rear Spoiler - Ford (KR3Z-6344210-AA)

 

[crazymayhem]

Thanks for the part numbers - but at the price tag (not that I should be surprised...)

There goes the ...

 

[Snoopy49]

That's why I was hoping for an aftermarket version of the Gurney Flap, $802 is a bit much for a piece of plastic..

 

[sox3]

I think the 800 is for the flap and adjustable camber strut mounts.

 

[Snoopy49]

I think the 800 is for the flap and adjustable camber strut mounts.

That's only if you ordered your car with the handling package. If you didn't, you have to buy it over the counter for $802

 

[Myshelby3425]

That's only if you ordered your car with the handling package. If you didn't, you have to buy it over the counter for $802

Until the aftermarket replicates them for $100

 

[SoCalTim]

Ford Accessories version of the 2019+ GT350 spoiler will be available in the next 6-12 months. Same thing happened with the 2018+ GT PP1 rear wing.... dealer price was $1600, but then 6 months down the line the Ford Accessories version was $500. Give it a little time and they will be down to a more manageable price point.

 

[cdh027]

Ford Accessories version of the 2019+ GT350 spoiler will be available in the next 6-12 months. Same thing happened with the 2018+ GT PP1 rear wing.... dealer price was $1600, but then 6 months down the line the Ford Accessories version was $500. Give it a little time and they will be down to a more manageable price point.

I wish the aftermarket would duplicate the R front splitter for a couple hundred bucks.

 

[Snoopy49]

Ford Accessories version of the 2019+ GT350 spoiler will be available in the next 6-12 months. Same thing happened with the 2018+ GT PP1 rear wing.... dealer price was $1600, but then 6 months down the line the Ford Accessories version was $500. Give it a little time and they will be down to a more manageable price point.

How well has Ford Performance Parts supported the 2015-2019 GT350's? Not much in the way of offerings. Why would it be any different for the 2020 GT500?

 

[SoCalTim]

2015-17 GT350 gloss black track spoiler same thing. Ford replacement part $1500, then a short while later the Ford Accessories version was available at $550.

Carbon fiber parts for the GT350R have always been at unaccessible pricing, but the gloss black plastic rear GT350 spoilers have been catered for with an Official Accessories version at a fraction of the cost. This will be the case with the 2019+ GT350 rear wing - attainable at a reasonable cost in a relatively short period of time.

No doubt the aftermarket will have quality replicas too. These will sell, and they know it,

 

[Evo42]

I think this is the 2019 GT350 / 2020 GT500 Gurney Flap.
Kit - Rear Spoiler - Ford (KR3Z-6344210-AB)

This should be the 2019 GT350 non-R & 2020 GT500 base Rear Spoiler/Wing.
Kit - Rear Spoiler - Ford (KR3Z-6344210-AA)

This is correct. AA is the spoiler. AB is the gurney flap. It was a PAIN finding this to be true or not. Parts Ford originally stated it was AB, but when I inquired about AA they said that was ALSO a part for the spoiler.

AA is listed as a rear spoiler "lower" and AB is listed as a rear spoiler "upper." Sadly, the images that they provide the people that look up the parts do not really get to see accurate images as I've learned. Even talking with the Dealership they were confused. The only way they we figured it out is that KR3Z-6344210-AB was at a dealership in Oklahoma. My dearship here in Tyler, Tx called them and asked for a direct picture of the part. Which confirmed that KR3Z-6344210-AB was the gurney flap.

So I then ordered KR3Z-6344210-AA and it came in TODAY (10/15/2019.) KR3Z-6344210-AA is the spoiler as I am physically looking at it. The actual spoiler itself. Retail for this is about $4000+ for retail, but most part stores (I got my from Lasco Ford) will sell for a lot less. In all, it cost me about $2800 with shipping and everything. Just to replace the one I have. All because I got a heatgun a little too close to the underside.

That said, it does come with some adhesive already on the underside. You just have to pull and peel some covering from over it. Direct bolt-on if you already own a 2019 Shelby GT350.

Hope this helps anyone else in my similar situation that can't figure it out.

 

[BlownGP]

This is correct. AA is the spoiler. AB is the gurney flap. It was a PAIN finding this to be true or not. Parts Ford originally stated it was AB, but when I inquired about AA they said that was ALSO a part for the spoiler.

AA is listed as a rear spoiler "lower" and AB is listed as a rear spoiler "upper." Sadly, the images that they provide the people that look up the parts do not really get to see accurate images as I've learned. Even talking with the Dealership they were confused. The only way they we figured it out is that KR3Z-6344210-AB was at a dealership in Oklahoma. My dearship here in Tyler, Tx called them and asked for a direct picture of the part. Which confirmed that KR3Z-6344210-AB was the gurney flap.

So I then ordered KR3Z-6344210-AA and it came in TODAY (10/15/2019.) KR3Z-6344210-AA is the spoiler as I am physically looking at it. The actual spoiler itself. Retail for this is about $4000+ for retail, but most part stores (I got my from Lasco Ford) will sell for a lot less. In all, it cost me about $2800 with shipping and everything. Just to replace the one I have. All because I got a heatgun a little too close to the underside.

That said, it does come with some adhesive already on the underside. You just have to pull and peel some covering from over it. Direct bolt-on if you already own a 2019 Shelby GT350.

Hope this helps anyone else in my similar situation that can't figure it out.

You ever get the wings installed

How does the gurney flap install. It bolts to the GT500 wing or using double sided tape.

They make a aftermarket GT500 wing
https://www.mrbodykit.com/index.php...d=4039&zenid=b7d78352b8dcace36aecc33fd6c9d9b1

I'm not sure the gurney flap would attach to it, if it even can.

 

[Caballus]

You ever get the wings installed

How does the gurney flap install. It bolts to the GT500 wing or using double sided tape.

They make a aftermarket GT500 wing
https://www.mrbodykit.com/index.php...d=4039&zenid=b7d78352b8dcace36aecc33fd6c9d9b1

I'm not sure the gurney flap would attach to it, if it even can.

Gurney flap bolts on.

GT500 wing is the 2019+ GT350 wing.

Sponsored