GT Custom remote catch can

[Jay-rod427]

Mounts back by the rear bumper where the purge canister would reside, -12 line up to the engine compartment where it is -12 Y to each valve cover. No catch can that looks out of place under the hood, easy to drain in 30 seconds just open the drain valve. -12 pcv adapters to the valve covers included. The catch can is made proper. A perforated tube welded to the an inlet, screen plate above it, and aluminum wool above that. Keeps all vapors caught and doesn’t drool anything from the dual 5/8” breathers.

$350 shipped.

Sponsored

 

[Jay-rod427]

Bump.

Includes the UPR valve cover adapters.

 

[huntiez]

so if its mounts where the evap system is did u delete the canister and all asking cause it looks like something i might consider current breather just makes a mess

 

[Jay-rod427]

Yes unhook 3 hoses and one connector to the evap canister, unbolt it(be careful with the plastic bumper support piece it's also bolted to its flimsy and seems it would break easily), and bolt this catch can in it's place. Large volume, better liquid containment, not cluttering up the engine compartment, easy to drain. Will have to have your tuner turn off the purge and related codes. Can also get rid of the purge solenoid and line at the front of the intake to further clean up the engine bay.

I wish I would've taken pics before removing, but just look under the bumper at the evap canister and you'll see how this goes. In the pic above it's upside down from how it would mount in the car from the two tabs hidden by the breathers.

@huntiez

 

[Jay-rod427]

bump

Sponsored