HOW TO: Swap PP gauges into standard model

[UNtamed67]

what app gives you the gauge screen on the sync3 screen?

OBDlink MX+ app with fine tuning and custom selection of gauges you want to show.

Sponsored

 

[SesiomSummers]

Hello guys I have a 15 GT premium Automatic and I got acces to one set of 350 unit can you guys help me on the Tune? I have the PP2 upgrade, will I lose the power pack 2 tune?

 

[Elvis66]

I converted mine as well..the plug was there ..just waiting for me

 

[SesiomSummers]

I converted mine as well..the plug was there ..just waiting for me

what year is your car? I have checked in 3 mustangs 2015 GT premium autos non of them has the plug behind the black plastic module

 

[Elvis66]

what year is your car? I have checked in 3 mustangs 2015 GT premium autos non of them has the plug behind the black plastic module

Mine is a 2018 actually it's a 2019 year model... It came with the black accent package with the color changing ambient lighting... Other than modifying the vents it was pretty much plug and Play

 

[Elvis66]

Before I had the GT I had a EcoBoost performance pack and going to a base model GT it really felt like something was missing not having the two gauges up in the dash.

 

[UNtamed67]

Hello guys I have a 15 GT premium Automatic and I got acces to one set of 350 unit can you guys help me on the Tune? I have the PP2 upgrade, will I lose the power pack 2 tune?

The change from switch to transducer is made in the tune and tune needs to be uploaded again after modification of this setting.

 

[Bnewell101]

So splicing into pins 53 and 54 I noticed there's 2 wires each that go in to the pin (small white and small blue), anyone know if you splice into both wires each or is the connection only to 1?

 

[Condor1970]

I didn't want to spend $1,400 on a Tru-Fiber dash trim kit, so I made my own from the original 3-Vent dash trim. Worked great. For those interested in not wanting to spend hundreds of dollars for a PP dash trim, I put the process for this conversion in the DIY forum.

https://www.mustang6g.com/forums/threads/skinning-a-horse-pp-gauge-upgrade.123559/

 

[sonicblue2004]

So splicing into pins 53 and 54 I noticed there's 2 wires each that go in to the pin (small white and small blue), anyone know if you splice into both wires each or is the connection only to 1?

Did you splice into both wires or just one?

 

[TexasRebel]

So splicing into pins 53 and 54 I noticed there's 2 wires each that go in to the pin (small white and small blue), anyone know if you splice into both wires each or is the connection only to 1?

Those wires are bonded. They have the same signal on them. Are they the CAN-BUS?

 

[10SpeedDemon]

Mine is a 2018 actually it's a 2019 year model... It came with the black accent package with the color changing ambient lighting... Other than modifying the vents it was pretty much plug and Play

I have a 2018 GT Non PP. I wanted to know where is the connector for the gauges

 

[Elvis66]

I have a 2018 GT Non PP. I wanted to know where is the connector for the gauges

It's clipped on the big black plastic piece behind the radio you'll see the plug.

 

[Lawguy85]

It's clipped on the big black plastic piece behind the radio you'll see the plug.

I’m trying to understand this post. Do you need a 2018+ to have it? 2018+, w/ 301A, etc.? I didn’t see an extra plug when I installed my radio, but I have a base ‘19. See below:

 

[Elvis66]

I’m trying to understand this post. Do you need a 2018+ to have it? 2018+, w/ 301A, etc.? I didn’t see an extra plug when I installed my radio, but I have a base ‘19. See below:

See that little square?? That's the plug

for the performance pack gauges it's clipped onto the back of that plastic section.

Sponsored