Looking at Ace Alloy AFF002

[Triton54]

Hey folk's, looking at upgrading my stock W/T's (255/40/19's) >black accent pkge< to these wheels, with 275/40/19 square. However when i order, the only thing i am NOT sure of is the offset, there are a few choices; 25,30,37,38,40. These are all on Steeda's website, My car is occasionally used at the drag strip, and quite a bit of high speed running, car is NOT lowered, and am not interested in lowering it, (if this helps) I realize these are a bit taller, but i can live with the small speedo difference. So, what are all your recommendations on this rotatable street set up? as far as choosing the best offset? btw, wheel width will be 9.5" thanks folks!!

Sponsored

 

[NightmareMoon]

9.5" ET37 is flush in the rear and not quite flush in the front, probably your best option.

 

[NightmareMoon]

9.5" ET37 is flush in the rear and not quite flush in the front, probably your best option.

If you're daily driving on those in snow want more of a stock inset then go with the ET40

 

[Triton54]

Thank you Nightmare! i was hoping you, and some of the others would respond, that know what they are talking about, when it gets cooler here, i will just put back on the stock set up, and run the car till the first snow. then it sits till spring. Oh, and i forgot to mention, i am NOT interested in running spacers anywhere on car. regards. Greg

 

[MidwayJ]

FYI, this is 270/40 on 19x9.5 ET33, not lowered. The +37 offset will be fine.

Sponsored