RPI Designs
Well-Known Member
- Joined
- Nov 18, 2014
- Threads
- 214
- Messages
- 900
- Reaction score
- 64
- Location
- Salem, Ohio
- Website
- www.rpidesigns.com
- Vehicle(s)
- 2015 Mustang GT - Test Mule
- Thread starter
- #1
2015-2019 Ford Mustang Ecoboost JLT Cold Air Intake - Black $315.84 With Code PHIL5 At Checkout
Upgrade the performance in your Mustang by adding the 2015-2019 Ford Mustang Ecoboost JLT Cold Air Intake - Black This air intake is an easy way to add more power without hours work.
INTAKE TUBE TO GROW INTO
JLT's 2015-18 Eco Boost Cold Air Intake is better than ever. Fully computer designed to optimize space and for best fit and finish. Large 5" filter inlet with radiused end for tons of smooth airflow.
Turbo end is 2.25" to meet up with the factory turbo, but then it steps up to 4" with another "barb" in the tube. So when you add a bigger turbo all you have to do is cut the end of the tube and add a larger coupler to fit up to a 4" Turbo inlet!!
HEAT SHIELD
Fully Roto molded heat shield and included fresh air duct to the grille designed to keep inlet air temps as cool as possible.
AIR FILTER
We use only the best air filters made by S&B to our specifications. We love S&B's tapered flange design and Powerstack filtered ends. With a huge 5” opening on the tube, we needed a huge filter. The result is a monster 5x7” filter with a built-in screen to straighten airflow.
GAINS AND TESTING
15-20+ RWHP has been seen with this JLT Intake with more testing coming soon.
KIT INCLUDES:
• JLT Plastic Intake Tube
• Silicone Coupler
• 5x7 S&B Powerstack Air Filter
• Heat Shield with duct
• HD Clamps & all needed hardware
• BOV/Bypass valve cap in case you go with an aftermarket Blow off valve in the future.
Fitment: 2015, 2016, 2017, 2018, 2019 Ford Mustang Ecoboost
https://www.rpidesigns.com/shop/ite...mustang-ecoboost-jlt-cold-air-intake---black/
Upgrade the performance in your Mustang by adding the 2015-2019 Ford Mustang Ecoboost JLT Cold Air Intake - Black This air intake is an easy way to add more power without hours work.
INTAKE TUBE TO GROW INTO
JLT's 2015-18 Eco Boost Cold Air Intake is better than ever. Fully computer designed to optimize space and for best fit and finish. Large 5" filter inlet with radiused end for tons of smooth airflow.
Turbo end is 2.25" to meet up with the factory turbo, but then it steps up to 4" with another "barb" in the tube. So when you add a bigger turbo all you have to do is cut the end of the tube and add a larger coupler to fit up to a 4" Turbo inlet!!
HEAT SHIELD
Fully Roto molded heat shield and included fresh air duct to the grille designed to keep inlet air temps as cool as possible.
AIR FILTER
We use only the best air filters made by S&B to our specifications. We love S&B's tapered flange design and Powerstack filtered ends. With a huge 5” opening on the tube, we needed a huge filter. The result is a monster 5x7” filter with a built-in screen to straighten airflow.
GAINS AND TESTING
15-20+ RWHP has been seen with this JLT Intake with more testing coming soon.
KIT INCLUDES:
• JLT Plastic Intake Tube
• Silicone Coupler
• 5x7 S&B Powerstack Air Filter
• Heat Shield with duct
• HD Clamps & all needed hardware
• BOV/Bypass valve cap in case you go with an aftermarket Blow off valve in the future.
Fitment: 2015, 2016, 2017, 2018, 2019 Ford Mustang Ecoboost
https://www.rpidesigns.com/shop/ite...mustang-ecoboost-jlt-cold-air-intake---black/
Sponsored
