NightmareMoon
Well-Known Member
Right calculations look correct. You’ll need aggressive camber to tuck or make flush that very aggressive offset. Its 10-15mm past what most people consider a flush offset. Something like 3 deg camber front and rear.Sorry to revive my old thread but I figured it's better than making a new one,
My current wheels are GTPP (9in wide +45 and 9.5in +52.5 rear) w/ 25mm spacers, if I'm doing the math right my effsticef offset is +20 front and +28.5 rear.
Based on this info the front wheels (19x10 +20) would be sticking out about 13mm more and the rear wheels (19x11 +30) would stick out about 17mm more my current setup .
I trust the guy making these offsets for a very aggressive setup, but I wanted some forum input.
Sponsored