Turn signal light

[Bluemustang]

My driver turn signal light is out. Anybody know the bulb I should buy?

Sponsored

 

[Shadow17]

If you want to go with a stock bulb again you'll probably be better off pulling it out and looking at the numbers on it to verify you get the right one. Could also be a good time to switch to LED signals.

 

[Shadow17]

https://www.cjponyparts.com/resources/mustang-light-bulb-buying-guide#s550other
this page also says what appears to be a part number for the stock one. And some explanation about how there are different bulbs or something.

 

[Bluemustang]

https://www.cjponyparts.com/resources/mustang-light-bulb-buying-guide#s550other
this page also says what appears to be a part number for the stock one. And some explanation about how there are different bulbs or something.

Excellent! What's the easier way to get to this you think? Take wheel off and I guess it's behind the fender liner?

 

[Shadow17]

Excellent! What's the easier way to get to this you think? Take wheel off and I guess it's behind the fender liner?

I did my entire turn signals at once so I had to remove the under tray and a couple of fender line pins. I think just popping the pins needed to get your hand in behind the fender liner should work for just a bulb. Shouldn't take long at all.

 

[Bluemustang]

I did my entire turn signals at once so I had to remove the under tray and a couple of fender line pins. I think just popping the pins needed to get your hand in behind the fender liner should work for just a bulb. Shouldn't take long at all.

Awesome! Great response. Thanks so much dude.

 

[Nagare]

Turn the wheel all the way, pop out the fender liner pins, fold fender liner out the way, stretch your arm all the way in there to pull the bulb and replace. When I originally had my bumper replaced under warranty one of the bulbs wasn't plugged in properly and it took the guy about 3 minutes at most to do it that way.

 

[Shadow17]

Awesome! Great response. Thanks so much dude.

No problem! Great to help where I can around here.

 

[Bluemustang]

Turn the wheel all the way, pop out the fender liner pins, fold fender liner out the way, stretch your arm all the way in there to pull the bulb and replace. When I originally had my bumper replaced under warranty one of the bulbs wasn't plugged in properly and it took the guy about 3 minutes at most to do it that way.

Thank you good sir!

 

[Bluemustang]

Now if I could just pull the driver's side of the bumper up more to match the other side! Lol
There's always something.

 

[Shadow17]

Now if I could just pull the driver's side of the bumper up more to match the other side! Lol
There's always something.

Don't worry my bumper doesn't exactly fit the best either. But if you don't know to look for it you'll never notice.

Sponsored