BMR Suspension's New S550 Rear Upper SHOCK MOUNTS: SM760 - Design Finalized!

[BmacIL]

I'd love to buy be these but I can't seem to find them for sale, are they not up on any sites?

Beefcake has them. Otherwise you can call BMR.

Sponsored

 

[DavidHuff]

Ordered mine from Terry and the set came complete. No issues with install.

Did your kit come with the updated hardware?

 

[DavidHuff]

My hammertone set arrived last Friday via DaSilva Racing. No stop washers in the package neither the larger or smaller diameter one. Kelly shooting you an email.

Did you ever get the updated smaller diameter stop washers?

 

[Scott]

Did you ever get the updated smaller diameter stop washers?

Kelly responded to my email right away, but the washers are going to be awhile coming.

 

[DavidHuff]

Kelly responded to my email right away, but the washers are going to be awhile coming.

My red BMR Upper Shock Mounts were just delivered with the large stop washers after requesting the updated version with the small stop washers.No instructions, but I will figure that out.LOL
I will contact BMR and Chris at Lethal Performance to get the proper small stop washers so I want take the chance of ruining a set of
new Mickey Thomson Drag Radials.
Very Disappointed!

 

[baevid]

You shouldn't have issues with the larger washer. Kelly sent me new hardware but all I really needed were the taller jam nuts but I had also bought some from the auto parts just to get the mounts on the car to test.

 

[DavidHuff]

You shouldn't have issues with the larger washer. Kelly sent me new hardware but all I really needed were the taller jam nuts but I had also bought some from the auto parts just to get the mounts on the car to test.

I am running a MT 305/45R/17 on a Weld Racing 10x!7 Rim and it sure is close even with the stock shock mount.Just Saying

 

[BmacIL]

I am running a MT 305/45R/17 on a Weld Racing 10x!7 Rim and it sure is close even with the stock shock mount.Just Saying

I think you'd be surprised.

 

[BMR Tech]

One person has an issue (with the exact 20x11 wheels I use and DO NOT have the issue) and the entire industry loses their minds.

Anyways. After receiving the parts, and even though likely not needed, if you want the smaller washers for the stops because you think you may need them - shoot me an email and I'll get them sent out.

 

[DavidHuff]

One person has an issue (with the exact 20x11 wheels I use and DO NOT have the issue) and the entire industry loses their minds.

Anyways. After receiving the parts, and even though likely not needed, if you want the smaller washers for the stops because you think you may need them - shoot me an email and I'll get them sent out.

Email Sent for smaller washers.

 

[DavidHuff]

One person has an issue (with the exact 20x11 wheels I use and DO NOT have the issue) and the entire industry loses their minds.

Anyways. After receiving the parts, and even though likely not needed, if you want the smaller washers for the stops because you think you may need them - shoot me an email and I'll get them sent out.

Kelly you are 100% correct that the large stop washers work on my 2017 Mustang GT with Weld Racing 10x17 with MT 305/45R17 drag radials.I do not need you to send the smaller washers.The information I was given was all wrong.
Thanks for all your help.

 

[DavidHuff]

I think you'd be surprised.

You are 100% correct and I went ahead and installed the BMR Shock Mounts and Viking Shocks.
Thanks!

 

[strengthrehab]

I'm going to install mine tomorrow. Since I have Pedders coilovers (similar to BC setup), I had to source two (2) M10x1.25 rod ends.

Pics will be tomorrow.

 

[xxchieferxx]

Anyone having issues with rubbing even after the smaller washer installed? 19x11.5 rears et 56 -1degree of camber.

 

[strengthrehab]

Got mine in today. Once I figured out the easy way to finagle the spacers into the mount I was golden.

Now I think I have a blown shock (unrelated to the mount situation)

Sponsored