Shop car making over 1100 rwhp....

[beefcake]

laid down 1145 rwhp yesterday...keep in mind, we are running a non locked setup, so that really skews the torque numbers alot and the horsepower numbers probably 6-7% based on the slip were seeing...

very happy with the first break in dyno on her!

11.5 to 1 livernois sleeved gt350 block, non ported heads, with valve job and springs, comp n/a stage 3 intake and stage 1 exhaust cams, fore fuel system, and hellion sleeper with solo catback

let us build one for you!!!



at team beefcake we sell what we run, run and build what we sell...
#thedifferencebetweenusandthem
#projectstalker
#airflowsolutions
#airlift
#briskplugs
#cervinisstalker
#circledconverters
#coldcase
#driveshaftshop
#exedyus
#finishlineperformance
#foreinnovations
#hellionturbo
#injectordynamics
#livernoismotorsports
#lundracing
#mmrracing
#mrrwheels
#precisionturbo
#soloperformance
#steedaultimatestopthehop
#steedaautosports
#teambeefcake6r80
#teambeefcakeracing
#turbosmart
#vikingperformance

Sponsored

 

[gstboy69]

Beef congrats for the numbers of the car!!

 

[gstboy69]

What's your opinion about edelbrock supercharger kit for A10 2018 in comparison with a vortech kit? With a different head of vortech the car have more horsepower?

 

[beefcake]

pretty much any kit can exceed what i would consider safe on the stock engine by far

 

[ugstang17]

Way to go boss. Now put it down at Bradenton and bring home a win!

 

[tj@steeda]

Looking good!

 

[olaosunt]

laid down 1145 rwhp yesterday...keep in mind, we are running a non locked setup, so that really skews the torque numbers alot and the horsepower numbers probably 6-7% based on the slip were seeing...

very happy with the first break in dyno on her!

11.5 to 1 livernois sleeved gt350 block, non ported heads, with valve job and springs, comp n/a stage 3 intake and stage 1 exhaust cams, fore fuel system, and hellion sleeper with solo catback

let us build one for you!!!



at team beefcake we sell what we run, run and build what we sell...
#thedifferencebetweenusandthem
#projectstalker
#airflowsolutions
#airlift
#briskplugs
#cervinisstalker
#circledconverters
#coldcase
#driveshaftshop
#exedyus
#finishlineperformance
#foreinnovations
#hellionturbo
#injectordynamics
#livernoismotorsports
#lundracing
#mmrracing
#mrrwheels
#precisionturbo
#soloperformance
#steedaultimatestopthehop
#steedaautosports
#teambeefcake6r80
#teambeefcakeracing
#turbosmart
#vikingperformance

Very nice .
Since you had the GT 350 block any reason why you did not use GT 350 heads ?

I assume cost is not really a factor .

 

[beefcake]

Very nice .
Since you had the GT 350 block any reason why you did not use GT 350 heads ?

I assume cost is not really a factor .

found a good deal on a used set of gen2 heads with a nice valve job already done on em

 

[olaosunt]

Nice . What brand springs ?

Did the car run at Bradenton ?

 

[beefcake]

pac,

no, we weren't quite ready

 

[watisthis]

@beefcake Could you do a mod list for project stalker? Thanks!

Sponsored