USMCtoARMY
Well-Known Member
- Joined
- Mar 10, 2017
- Threads
- 25
- Messages
- 788
- Reaction score
- 297
- Location
- Lake Stevens, WA
- Vehicle(s)
- 2016 Mustang V6 MT
- Thread starter
- #1
SSMS Twin Turbo Kit. I found out I was extended here in Germany (military orders) for at least another year on top of my remaining year, which means I can't take advantage of my recently purchased TT kit anytime in the near future and it will be just sitting in my mother-in-law's garage with my car back in Ohio. I am going to sell this kit now that I know I am not going to be home for quite some time.
I bought this off a member in the S550 V6 group. So all photos are from his car when it was installed. Great budget kit. Fun as hell on the streets.
EcoBoost TT kit highlights:
-Two K03 turbos rebuilt with Gen2 parts
-DW400 415 LPH fuel pump
-Rev9 Intercooler w/custom made mounting brackets so you an mount the intercooler in front of the bumper guard and not behind
-Jodar BOV already integrated into piping w/12lb spring
-Turbo Smart Electronic Boost Controller
-Turbo Smart Boost Solenoid
-Catless 2 1/4 inch turbo downpipe fabricated from stock clamp connectors to fit any aftermarket exhaust and has the O2 extensions
-2.5 bar MAP sensor and pigtail harness
-Coolant Feed and return Lines (AN Fittings)
-Oil Feed and Return Lines (An Fittings)
-Charge Pipes and Intercooler Pipes
-Ported manifolds and ported gaskets
Additionally parts required for the kit NOT provided by me:
-One 3.5L manifold gasket to replace one in the kit that has a crack ($20.00)
-Hayden Oil Cooler ($50).
-Intake piping for the turbos because the original setup ran turbo screeens or you can run turbo screens.
-65lbs injectors
Interested let me know. I will sell it at cost. I bought it for which is $2000.00 not including shipping (I also paid for this when I bought it).
Review of this kit:
I bought this off a member in the S550 V6 group. So all photos are from his car when it was installed. Great budget kit. Fun as hell on the streets.
EcoBoost TT kit highlights:
-Two K03 turbos rebuilt with Gen2 parts
-DW400 415 LPH fuel pump
-Rev9 Intercooler w/custom made mounting brackets so you an mount the intercooler in front of the bumper guard and not behind
-Jodar BOV already integrated into piping w/12lb spring
-Turbo Smart Electronic Boost Controller
-Turbo Smart Boost Solenoid
-Catless 2 1/4 inch turbo downpipe fabricated from stock clamp connectors to fit any aftermarket exhaust and has the O2 extensions
-2.5 bar MAP sensor and pigtail harness
-Coolant Feed and return Lines (AN Fittings)
-Oil Feed and Return Lines (An Fittings)
-Charge Pipes and Intercooler Pipes
-Ported manifolds and ported gaskets
Additionally parts required for the kit NOT provided by me:
-One 3.5L manifold gasket to replace one in the kit that has a crack ($20.00)
-Hayden Oil Cooler ($50).
-Intake piping for the turbos because the original setup ran turbo screeens or you can run turbo screens.
-65lbs injectors
Interested let me know. I will sell it at cost. I bought it for which is $2000.00 not including shipping (I also paid for this when I bought it).
Review of this kit:
Sponsored
Last edited: